SUMO | ห้างหุ้นส่วนจำกัดฮะเซ้งพาณิชย์ เป็นผู้นำเข้าและตัวแทนจำหน่ายสินค้าสำหรับโรงงานอุตสาหกรรมประเภท วาล์ว ปะเก็น เฟืองโซ่ โซ่ขับ โซ่ลำเลียง คัปปิ้งโซ่ เหล็กรัด และอื่นๆ, HAH SENG TRADING

Short pitch precision roller chains(A series) Ansi Roller chain

ANSI Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	T max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*15	4.7625	2.48	2.38	1.62	6.10	6.90	4.30	0.60	1.80	2.0	0.08
*25	6.350	3.30	3.18	2.31	7.90	8.40	6.00	0.80	3.50	4.6	0.15
*35	9.525	5.08	4.77	3.58	12.40	13.17	9.00	1.30	7.90	10.8	0.33
41	12.700	7.77	6.25	3.58	13.75	15.00	9.91	1.30	6.67	12.6	0.41
40	12.700	7.95	7.85	3.96	16.60	17.80	12.00	1.50	14.10	17.5	0.62
50	15.875	10.16	9.40	5.08	20.70	22.20	15.09	2.03	22.20	29.4	1.02
60	19.050	11.91	12.57	5.94	25.90	27.70	18.00	2.42	31.80	41.5	1.50
80	25.400	15.88	15.75	7.92	32.70	35.00	24.00	3.25	56.70	69.4	2.60
100	31.750	19.05	18.90	9.53	40.40	44.70	30.00	4.00	88.50	109.2	3.91
120	38.100	22.23	25.22	11.10	50.30	54.30	35.70	4.80	127.00	156.3	5.62
140	44.450	25.40	25.22	12.70	54.40	59.00	41.00	5.60	172.40	212.0	7.50
160	50.800	28.58	31.55	14.27	64.80	69.60	47.80	6.40	226.80	278.9	10.10
180	57.150	35.71	35.48	17.46	72.80	78.60	53.60	7.20	280.20	341.8	13.45
200	63.500	39.68	37.85	19.85	80.30	87.20	60.00	8.00	353.80	431.6	16.15
240	76.200	47.63	47.35	23.81	95.50	103.00	72.39	9.50	510.30	622.5	23.20
*Bushing chain : d1 in the table indicate the external diameter of the bushing.

Print This Product

SHORT PITCH PRECISION ROLLER CHAINS(A SERIES) ANSI ROLLER CHAIN

ANSI Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Transverse pitch	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	T max	Pt	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*25-2	6.350	3.30	3.18	2.31	14.5	15.0	6.00	0.80	6.40	7.0	8.6	0.28
*35-2	9.525	5.08	4.77	3.58	22.5	23.3	9.00	1.30	10.13	15.80	19.7	0.63
41-2	12.700	7.77	6.25	3.58	25.7	26.9	9.91	1.30	11.95	13.34	16.9	0.81
40-2	12.700	7.95	7.85	3.96	31.0	32.2	12.00	1.50	14.38	28.20	35.9	1.12
50-2	15.875	10.16	9.40	5.08	38.9	40.4	15.09	2.03	18.11	44.40	58.1	2.00
60-2	19.050	11.91	12.57	5.94	48.8	50.5	18.0	2.42	22.78	63.60	82.1	2.92
80-2	25.400	15.88	15.75	7.92	62.7	64.3	24.00	3.25	29.29	113.40	141.8	5.15
100-2	31.750	19.05	18.90	9.53	76.4	80.5	30.00	4.00	35.76	177.00	219.4	7.80
120-2	38.100	22.23	25.22	11.10	95.8	99.7	35.70	4.80	45.44	254.00	314.9	11.70
140-2	44.450	25.40	25.22	12.70	103.3	107.9	41.00	5.60	48.87	344.80	427.5	15.40
160-2	50.800	28.58	31.55	14.27	123.3	128.1	47.80	6.40	58.55	453.60	562.4	20.14
180-2	57.150	35.71	35.48	17.46	138.6	144.4	53.60	7.20	65.84	560.50	695.0	29.22
200-2	63.500	39.68	37.85	19.85	151.9	158.8	60.00	8.00	71.55	707.60	877.4	32.24
240-2	76.200	47.63	47.35	23.81	183.4	190.8	72.39	9.50	87.83	1020.60	1255.3	45.23
*Bushing chain : d1 in the table indicate the external diameter of the bushing.

Print This Product

Short pitch precision roller chain(B series) BS Roller chain, simplex roller chains

DIN ISO Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	t/T max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
04B-1	6.000	4.00	2.80	1.85	6.80	7.8	5.00	0.60	3.0	3.2	0.11
05B-1	8.000	5.00	3.00	2.31	8.20	8.9	7.10	0.80	5.0	5.9	0.20
*06B-1	9.525	6.35	5.72	3.28	13.15	14.1	8.20	1.30	9.0	10.4	0.41
08B-1	12.700	8.51	7.75	4.45	16.70	18.2	11.80	1.60	18.0	19.4	0.69
10B-1	15.875	10.16	9.65	5.08	19.50	20.9	14.70	1.70	22.4	27.5	0.93
12B-1	19.050	12.07	11.68	5.72	22.50	24.2	16.00	1.85	29.0	32.2	1.15
16B-1	25.400	15.88	17.02	8.28	36.10	37.4	21.00	4.15/3.1	60.0	72.8	2.71
20B-1	31.750	19.05	19.56	10.19	41.30	45.0	26.40	4.5/3.5	95.0	106.7	3.70
24B-1	38.100	25.04	25.40	14.63	53.40	57.8	33.20	6.0/4.8	160.0	178.0	7.10
28B-1	44.450	27.94	30.99	15.90	65.10	69.5	36.70	7.5/6.0	200.0	222.0	8.50
32B-1	50.800	29.21	30.99	17.81	66.00	71.0	42.00	7.0/6.0	250.0	277.5	10.25
40B-1	63.500	39.37	38.10	22.89	82.20	89.2	52.96	8.5/8.0	355.0	394.0	16.35
48B-1	76.200	48.26	45.72	29.24	99.10	107.0	63.80	12/10	560.0	621.6	25.00
*Straight side plates

Print This Product

SHORT PITCH PRECISION ROLLER CHAIN(B SERIES) BS ROLLER CHAIN, duplex roller chain

DIN ISO Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Transverse pitch	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 minW	d2 max	L max	Lc max	h2 max	t/T max	Pt	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
05B-2	8.000	5.00	3.00	2.31	13.9	14.5	7.10	0.80	5.64	7.8	10.2	0.33
*06B-2	9.525	6.35	5.72	3.28	23.4	24.4	8.20	1.30	10.24	16.9	18.7	0.77
08B-2	12.700	8.51	7.75	4.45	31.2	32.2	11.80	1.60	13.92	32.0	38.7	1.34
10B-2	15.875	10.16	9.65	5.08	36.1	37.5	14.70	1.70	16.59	44.5	56.2	1.84
12B-2	19.050	12.07	11.68	5.72	42.0	43.6	16.00	1.85	19.46	57.8	66.1	2.31
16B-2	25.400	15.88	17.02	8.28	68.0	69.3	21.00	4.15/3.1	31.88	106.0	133.0	5.42
20B-2	31.750	19.05	19.56	10.19	77.8	81.5	26.40	4.5/3.5	36.45	170.0	211.2	7.20
24B-2	38.100	25.04	25.40	14.63	101.7	106.2	33.20	6.0/4.8	48.36	280.0	319.2	13.40
28B-2	44.450	27.94	30.99	15.90	124.6	129.1	36.70	7.5/6.0	59.56	360.0	406.8	16.60
32B-2	50.800	29.21	30.99	17.81	124.6	129.6	42.00	7.0/6.0	58.55	450.0	508.5	21.00
40B-2	63.500	39.37	38.10	22.89	154.5	161.5	52.96	8.5/8.0	72.29	630.0	711.9	32.00
48B-2	76.200	48.26	45.72	29.24	190.4	198.2	63.80	12/10	91.21	1000.0	1130.0	50.00
*Straight side plates

Print This Product

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, A-1, K-1

Chain No.	P	G	F	W	T	h4	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm
40	12.700	9.5	25.40	35.2	1.50	7.90	3.4
50	15.875	12.7	31.75	46.2	2.03	10.30	5.5
60	19.050	15.9	38.10	55.6	2.42	11.90	5.5
80	25.400	19.1	50.80	64.8	3.25	15.90	6.8
100	31.750	25.4	63.50	87.3	4.00	19.80	9.2
120	38.100	28.6	76.20	108.5	4.80	23.00	9.8
140	44.450	34.9	88.90	123.0	5.60	28.60	11.4
160	50.800	38.1	101.60	142.8	6.40	31.80	13.1
*06B	9.525	8.0	19.04	27.0	1.30	6.50	3.5
08B	12.700	9.5	25.40	36.4	1.60	8.90	4.3
10B	15.875	14.3	31.75	44.6	1.70	10.31	5.3
12B	19.050	16.0	38.10	52.4	1.85	13.46	6.4
16B	25.400	19.1	50.80	72.6	3.10	15.88	6.4
* Straight side plates

Print This Product

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

Chain No.	P	G	C	F	T	d4
Chain No.	mm	mm	mm	mm	mm	mm
40	12.700	9.5	12.70	19.05	1.50	3.4
50	15.875	12.7	15.90	25.25	2.03	5.5
60	19.050	15.9	18.30	29.33	2.42	5.5
80	25.400	19.1	24.60	34.70	3.25	6.8
100	31.750	25.4	31.80	43.30	4.00	9.2
120	38.100	28.6	36.50	51.60	4.80	9.8
140	44.450	34.9	44.50	62.00	5.60	11.4
160	50.800	38.1	50.80	69.85	6.40	13.1
*06B	9.525	8.0	9.52	13.50	1.30	3.5
08B	12.700	9.5	13.35	18.90	1.60	4.3
10B	15.875	14.3	16.50	22.95	1.70	5.3
12B	19.050	16.0	21.45	28.60	1.85	6.4
16B	25.400	19.1	23.15	34.00	3.10	6.4

Print This Product

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WA-1, WA-2, WK-1, WK-2

Chain No.	P	G	L	F	W	T	h4	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm	mm
40	12.700	23.00	12.700	25.4	35.6	1.50	7.90	3.4
50	15.875	28.80	15.875	31.8	46.8	2.03	10.30	5.5
60	19.050	34.65	19.050	38.1	56.4	2.42	11.90	5.5
80	25.400	45.90	25.400	50.8	73.2	3.25	15.90	6.8
100	31.750	57.65	31.750	63.5	89.8	4.00	19.80	9.2
08B	12.700	24.00	12.700	25.4	36.4	1.60	8.90	4.3
10B	15.857	29.58	15.875	31.8	44.6	1.70	10.31	5.3
12B	19.050	34.05	19.050	38.1	52.4	1.85	13.46	6.4
16B	25.400	46.04	25.400	50.8	72.6	3.10	15.88	6.4

Print This Product

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WSA-1, WSA-2, WSK-1, WSK-2

Chain No.	P	G	L	C	F	T	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm
40	12.700	23.00	12.700	12.70	17.40	1.50	3.4
50	15.875	28.80	15.875	15.90	23.05	2.03	5.5
60	19.050	34.65	19.050	18.30	26.86	2.42	5.5
80	25.400	45.90	25.400	24.60	35.45	3.25	6.8
100	31.750	57.65	31.750	31.80	44.00	4.00	9.2
08B	12.700	23.30	12.700	13.35	18.90	1.60	4.3
10B	15.857	29.58	15.875	16.50	22.95	1.70	5.3
12B	19.050	34.05	19.050	21.45	28.60	1.85	6.4
16B	25.400	46.04	25.400	23.15	34.00	3.10	6.4

Print This Product

DOUBLE PITCH CONVEYOR CHAINS, small roller type

DIN ISO Chain	ANSI Chain	pitch	Roller Diameter	Width between inner plate	Pin diameter	Pin Length		Inner Plate depth	Plate Thickness	Ultimate tensile strength	Average tensile strength	Weight per meter
		P	d1	b1	d2	L	Lc	h2	T	Q	Q0	q
		mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	kg/m
C208A C208AL	C2040 C2042	25.40	7.95 15.88	7.85	3.96	16.6	17.8	12.0	1.50	14.1	16.7	0.50 0.84
C208AH	C2040H	25.40	7.95	7.85	3.96	18.8	19.9	12.0	2.03	14.1	17.2	0.65
C208B C208BL		25.40	8.51 15.88	7.75	4.45	16.7	18.2	11.8	1.60	18.0	19.4	0.55 0.89
C210A C210AL	C2050 C2052	31.75	10.16 19.05	9.40	5.08	20.7	22.2	15.0	2.03	22.2	28.1	0.78 1.27
C212A C212AL	C2060 C2062	38.10	11.91 22.23	12.57	5.94	25.9	27.7	18.0	2.42	31.8	36.8	1.12 1.61
C212AH C212AHL	C2060H C2062H	38.10	11.91 22.23	12.57	5.94	29.2	31.6	18.0	3.25	31.8	41.6	1.44 2.07
C216A C216AL	C2080 C2082	50.80	15.88 28.58	15.75	7.92	32.7	36.5	24.0	3.25	56.7	65.7	2.08 3.12
C216AH C216AHL	C2080H C2082H	50.80	15.88 28.58	15.75	7.92	36.2	39.4	24.4	4.00	56.7	70.0	2.54 3.58
C220A C220AL	C2100 C2102	63.50	19.05 39.67	18.90	9.53	40.4	44.7	30.0	4.00	88.5	102.6	3.01 4.83
C220AH C220AHL	C2100H C2102H	63.50	19.05 39.67	18.90	9.53	43.6	46.9	30.0	4.80	88.5	112.4	3.56 5.38
C224A C224AL	C2120 C2122	76.20	22.23 44.45	25.22	11.10	50.3	54.3	35.7	4.80	127.0	147.3	4.66 7.66
C224AH C224AHL	C2120H C2122H	76.20	22.23 44.45	25.22	11.10	53.5	57.5	35.7	5.60	127.0	160.9	5.26 8.26
C232A C232AL	C2160 C2162	101.60	28.58 57.15	31.75	14.27	64.8	69.6	47.8	6.40	226.8	278.9	8.23 11.95
C232AH C232AHL	C2160H C2162H	101.60	28.58 57.15	31.75	14.27	68.2	73.0	47.8	7.20	226.8	285.8	9.06 12.77

Print This Product

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS

DIN ISO Chain No	ANSI Chain No.	P	G	L	F	W	h4	d4
DIN ISO Chain No	ANSI Chain No.	mm	mm	mm	mm	mm	mm	mm
C208A C208AL	C2040 C2042	25.4	19.1	9.5	25.4	39.6	9.1	3.4
C208B C208BL		25.4	23.2	12.7	25.4	39.6	9.1	4.5
C210A C210AL	C2050 C2052	31.75	23.8	11.9	31.8	49.0	11.1	5.5
C212A 212AL	C2060 C2062	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C212AH 212AHL	C2060H C2062H	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C216A C216AL	C2080 C2082	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C216AH C216AHL	C2080H C2082H	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C220A C220AL	C2100 C2102	63.5	47.6	23.8	66.6	107.5	23.4	9.2
C220AH C220AHL	C2100H C2102H	63.5	47.6	23.8	66.6	107.5	23.4	9.2
C224A C224AL	C2120 C2122	76.2	57.2	28.6	79.3	121.4	27.8	11.0
C224AH C224AHL	C2120H C2122H	76.2	57.2	28.6	79.3	121.4	27.8	11.0
C232A C232AL	C2160 C2162	101.6	76.2	38.1	104.7	151.6	36.5	13.1
C232AH C232AHL	C2160H C2162H	101.6	76.2	38.1	104.7	151.6	36.5	13.1

Print This Product

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

DIN ISO Chain No	ANSI Chain No.	P	G	L	C1	C2	F	d4	d5
DIN ISO Chain No	ANSI Chain No.
C208A C208AL	C2040 C2042	25.40	19.1	9.5	11.1	13.5	20.5	3.4	5.5
C208B C208BL		25.40	23.2	12.7	11.1	13.5	20.5	4.5	5.5
C210A C210AL	C2050 C2052	31.75	23.8	11.9	14.3	15.9	25.0	5.5	6.6
C212A 212AL	C2060 C2062	38.10	23.8	14.3	17.5	19.1	32.9	5.5	9.2
C212AH 212AHL	C2060H C2062H	38.10	28.6	14.3	17.5	19.1	32.9	5.5	9.2
C216A C216AL	C2080 C2082	50.80	28.6	19.1	22.2	25.4	43.5	6.6	11.0
C216AH C216AHL	C2080H C2082H	50.80	38.1	19.1	22.2	25.4	43.5	6.6	11.0
C220A C220AL	C2100 C2102	63.50	47.6	23.8	28.6	31.8	50.4	8.4	13.0
C220AH C220AHL	C2100H C2102H	63.50	47.6	23.8	28.6	31.8	50.4	8.4	13.0

Print This Product

Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length	Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	t/T max	Q min	Q0	q
mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*35SS	9.525	5.08	4.77	3.58	12.4	13.17	9.00	1.30	5.5	6.6	0.33
40SS	12.700	7.95	7.85	3.96	16.6	17.8	12.00	1.50	9.6	10.8	0.63
50SS	15.875	10.16	9.40	5.08	20.7	22.2	15.09	2.03	15.2	17.2	1.03
60SS	19.050	11.91	12.57	5.94	25.9	27.7	18.00	2.42	21.7	26.4	1.51
80SS	25.400	15.88	15.75	7.92	32.7	35.0	24.00	3.25	38.9	46.6	2.62
100SS	31.750	19.05	18.90	9.53	40.4	44.7	30.00	4.00	60.0	70.2	3.94
04BSS	6.000	4.00	2.80	1.85	6.80	7.8	5.00	0.60	2.0	2.4	0.11
05BSS	8.000	5.00	3.00	2.31	8.20	8.9	7.10	0.80	3.5	4.1	0.20
#06BSS	9.525	6.35	5.72	3.28	13.15	14.1	8.20	1.30	6.2	6.8	0.41
08BSS	12.700	8.51	7.75	4.45	16.7	18.2	11.80	1.60	12.0	14.3	0.70
10BSS	15.845	10.16	9.65	5.08	19.5	20.9	14.70	1.70	14.5	17.2	0.94
12BSS	19.050	12.07	11.68	5.72	22.5	24.2	16.00	1.85	18.5	20.9	1.16
16BSS	25.400	15.88	17.02	8.28	36.1	37.4	21.00	4.15/3.1	40.0	47.6	2.73
20BSS	31.750	19.05	19.56	10.19	41.3	45.0	26.40	4.5/3.5	59.0	69.6	3.73
*Brushing chain : d1 in the table indicate the external diameter of the bushing. #Straight side plates

Chain No.	Pitch	Lacing	Plate height	Plate Thickness	Pin Diameter	Plate Length	Minimum Tensile strength	Weight Per Meter
P		h2 max	T max.	d2 max.	L max
mm		mm	mm	mm	mm	kN	kg./m
BL422	12.70	2×2	12	2.0	5.08	11.05	21.5	0.64
BL423	2×3	13.16	23	0.79
BL434	3×4	17.4	34.9	1.10
BL444	4×4	19.51	35.5	1.24
BL446	4×6	23.75	46	1.54
BL466	6×6	27.99	47.3	1.84
BL488	8×8	36.45	50.0	2.46
BL522	15.875	2×2	15	2.42	5.94	12.9	31.3	0.94
BL523	2×3	15.37	36.8	1.16
BL534	3×4	20.32	51.5	1.62
BL544	4×4	22.78	59	1.84
BL546	4×6	27.74	73.6	2.30
BL566	6×6	32.18	88.4	2.74
BL588	8×8	42.57	118	3.64
BL622	19.05	2×2	18	3.25	7.92	17.37	55.5	1.46
BL623	2×3	20.73	64.4	1.80
BL634	3×4	27.43	96.2	2.49
BL644	4×4	30.78	103	2.83
BL646	4×6	37.49	119	3.52
BL666	6×6	44.2	154.7	4.21
BL688	8×8	57.61	206.3	5.60
BL822	25.40	2×2	24	4.0	9.53	21.34	76.7	2.80
BL823	2×3	25.48	95.8	3.47
BL834	3×4	33.76	144.7	4.82
BL844	4×4	37.9	153.3	5.43
BL846	4×6	46.18	192.7	6.83
BL866	6×6	54.46	230	8.19
BL888	8×8	71.02	306.7	10.90
BL1022	31.75	2×2	30	4.8	11.1	25.37	106	3.73
BL1023	2×3	30.33	132	4.65
BL1034	3×4	40.23	185	6.46
BL1044	4×4	45.19	212	7.37
BL1046	4×6	55.09	265	9.18
BL1066	6×6	65.0	318	11.00
BL1088	8×8	84.81	424	14.60
BL1222	38.10	2×2	35.7	5.6	12.7	29.62	145.2	5.13
BL1223	2×3	35.43	181	6.37
BL1234	3×4	47.07	254	8.86
BL1244	4×4	52.88	290	10.10
BL1246	4×6	64.52	363	12.60
BL1266	6×6	76.15	435	15.10
BL1288	8×8	99.42	580	20.00

Chain No.	Averarage Tensile Strenght	Pitch	Roller Diameter	Inner Width	Pin Diameter	inner Plate Thickness	Outer Plate Thickness	Plate Height
lbf	P	R	W	D	T1	T2	H
SM220040	22000	10136	47.6	19.0	19.0	5.0	5.0	38.1
SM400060	40000	152.4	66.7	25.4	27.0	8.0	8.0	50.8
SM600060	60000	152.4	66.7	25.4	27.0	9.0	8.0	50.8

Chain No.	Pitch	Roller Diameter	Inner Width	Pin Diameter	Inner PlateThickness	Outer PlateThickness	Plate Height	Total Lenght
P	R	W	D	T1	T2	H	L1	L2
P90F1	90.0	60.0	29.5	14.2	8.0	7.0	38.5	211	236.6

RICE MILL CONVEYOR CHAIN, C2080HF6

RICE MILL CONVEYOR CHAIN, โซ่โรงสีข้าว, sumo

No.	Name of Part	Material	Weight
1	Pin Link Plate	45Mn	48.5g
2	Pin	20CrMnMo	14.0g
3	Roller Link Plate	45Mn	45.0g
4	Bushing	10	8.68g
5	Roller	10	12.0g
6	CL Pin Link Plate	45Mn	48.5g
7	Connecting Pin	20CrMnMo	14.9g
8	Cotter Pin
9	Attachment Plate	45Mn	103g

Print This Product

ANSI 25 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
9	18.57	21	6	7	13	15	0.014	* * * * * S35C
10	20.55	23	6	9	14	15	0.018
11	22.54	25	6	10	16	15	0.023
12	24.53	28	6	12	18	15	0.030
13	26.53	30	6	14	20	20	0.048
14	28.54	32	6	14	20	20	0.051
15	30.54	34	6	14	20	20	0.053
16	32.55	36	8	19	25	20	0.077
17	34.56	38	8	19	25	20	0.079
18	36.57	40	8	19	25	20	0.081
19	38.58	42	8	19	25	20	0.084
20	40.59	44	8	19	25	20	0.087
21	42.61	46	8	22	30	20	0.119
22	44.62	48	8	22	30	20	0.121
23	46.63	50	8	22	30	20	0.124
24	48.65	52	8	22	30	20	0.127
25	50.66	54	8	25	35	20	0.165
26	52.68	56	8	30	40	20	0.208
27	54.70	58	8	30	40	20	0.212
28	56.71	60	8	30	40	20	0.216
29	58.73	62	8	35	45	25	0.324
30	60.75	64	8	35	45	25	0.328
31	62.77	66	10	35	45	25	0.328
32	64.78	68	10	40	50	25	0.396
33	66.80	70	10	40	50	25	0.401
34	68.82	72	10	40	50	25	0.405
35	70.84	74	10	40	50	25	0.410
36	72.86	76	10	40	50	25	0.415
37	74.88	78	10	40	50	25	0.421
38	76.90	80	10	40	50	25	0.426
39	78.91	82	10	40	50	25	0.431
40	80.93	84	10	40	50	25	0.437
41	82.95	87	10	40	50	25	0.442
42	84.97	89	10	40	50	25	0.448
43	86.99	91	10	40	50	25	0.454
44	89.01	93	10	40	50	25	0.460
45	91.03	95	10	40	50	25	0.466
46	93.05	97	10	40	50	25	0.473
47	95.07	99	10	40	50	25	0.479
48	97.09	101	10	40	50	25	0.486
50	101.13	105	10	40	50	25	0.500
54	109.21	113	10	40	50	25	0.528
60	121.33	125	10	40	50	30	0.651

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :9T=10.50mm, 10T=12.50mm, 11T=14.50mm, 12T=16.50mm, 13T=18.50mm

Print This Product

ANSI 35 Standard Sprocket

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	24.88	28	8	10	19	19	0.02	* * * * * * S35C (B TYPE)
9	27.84	31	8	11	22	20	0.06
10	30.84	35	8	12	25	20	0.08
11	33.81	38	8	14	27	20	0.09
12	36.80	41	9	16	31	20	0.12
13	39.80	44	9	18	32	20	0.12
14	42.81	47	9	16	30	20	0.12
15	45.81	51	9	22	35	20	0.16
16	48.82	54	9	23	37	20	0.19
17	51.84	57	11	25	41	20	0.22
18	54.85	60	11	28	44	20	0.25
19	57.87	63	11	29	47	20	0.28
20	60.89	66	11	32	50	20	0.32
21	63.91	69	11	32	53	20	0.36
22	66.93	72	11	32	53	20	0.37
23	69.95	75	11	32	53	20	0.38
24	72.97	78	11	32	53	22	0.43
25	76.00	81	11	32	53	22	0.44
26	79.02	84	11	32	53	22	0.45
27	82.05	87	11	32	53	22	0.46
28	85.07	90	11	32	53	22	0.48
29	88.10	93	11	32	53	22	0.49
30	91.12	96	11	32	53	22	0.51
31	94.15	99	11	32	53	22	0.52
32	97.18	102	11	32	53	22	0.54
33	100.20	105	11	32	53	22	0.56
34	103.23	109	11	32	53	22	0.57
35	106.26	112	11	32	53	22	0.59
36	109.29	115	11	32	53	22	0.61
37	112.31	118	11	32	63	22	0.77
38	115.34	121	11	32	63	25	0.82
39	118.37	124	11	32	63	25	0.83
40	121.40	127	11	32	63	25	0.85
41	124.43	129	11	42	63	25	0.85	SS41(BW TYPE)
42	127.46	133	15	40	63	25	0.92
43	130.48	135	15	40	63	25	0.92
44	133.53	138	15	40	63	25	0.92
45	136.55	142	15	40	63	25	0.95
46
48	145.64	151	15	40	63	25	1.00
50	151.69	157	15	40	63	25	1.05
52
54	163.80	169	15	40	63	25	1.20
60	181.99	187	15	40	63	25	1.30

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :8T=13.92mm,9T=17.02mm, 10T=20.07mm, 11T=23.11mm, 12T=25.91mm, 13T=28.96mm
2. B-type solid sprockets over 40 teeth made by S35C are available.

Print This Product

ANSI 40 STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	33.20	38	9	12.7	24.6	22.2	0.10	* * * * * S35C (B TYPE)
9	37.13	42	9	14	28	22	0.11
10	41.10	46	9	18	32	22	0.14
11	45.08	51	10	23	37	22	0.19
12	49.07	55	10	25	40	22	0.22
13	53.07	59	13	23	37	22	0.23
14	57.07	63	13	26	42	22	0.28
15	61.08	67	13	28	46	22	0.34
16	65.10	71	13	30	50	22	0.40
17	69.12	76	13	32	54	22	0.46
18	73.14	80	13	32	57	22	0.51
19	77.16	84	13	38	62	22	0.59
20	81.18	88	14	42	67	25	0.76
21	85.21	92	14	45	71	25	0.85
22	89.24	96	14	48	75	25	0.95
23	93.27	100	14	48	77	25	1.00
24	97.30	104	14	40	63	25	0.84
25	101.33	108	14	40	63	25	0.88
26	105.36	112	14	40	63	25	0.92
27	109.40	116	14	40	63	25	0.96
28	113.43	120	14	40	63	25	1.00
29	117.46	124	14	40	63	25	1.05
30	121.50	128	14	40	63	25	1.10
31	125.53	133	14	45	63	28	1.20
32	129.57	137	14	45	68	28	1.30
33	133.61	141	14	45	68	28	1.30
34	137.64	145	14	45	68	28	1.30
35	141.68	149	14	45	68	28	1.40
36	145.72	153	17	45	68	28	1.40	SS41(BW TYPE
38	153.79	161	17	45	68	28	1.50
40	161.87	169	17	45	68	28	1.60
41	165.91	173	17	48	73	32	1.80
42	169.95	177	17	48	73	32	2.00
43	173.98	181	17	48	73	32
44	178.02	185	17	48	73	32
45	182.06	189	17	48	73	32	2.10
48	194.18	201	17	48	73	32	2.30
50	202.26	209	17	48	73	32	2.40
54	218.42	226	17	48	73	32	2.80
60	242.66	250	17	48	73	32	3.20

Print This Product

ANSI 50 STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	41.48	47	9	15.9	28.6	25.4	0.19	* * * * * * S35C (B TYPE)
9	46.41	53	10	19	34	25	0.20
10	51.38	58	10	22	40	25	0.27
11	56.35	64	13	24	46	25	0.33
12	61.34	69	13	30	51	25	0.41
13	66.34	74	13	30	51	25	0.46
14	71.34	79	13	32	52	25	0.52
15	76.35	84	13	36	57	25	0.62
16	81.37	89	13	40	62	25	0.72
17	86.39	94	13	42	67	25	0.83
18	91.42	100	13	48	72	28	1.00
19	96.45	105	13	48	73	28	1.10
20	101.48	110	14	48	73	28	1.20
21	106.51	115	14	48	73	28	1.20
22	111.55	120	16	48	73	28	1.30
23	116.58	125	16	48	73	28	1.30
24	121.62	130	16	48	73	28	1.45
25	126.66	135	16	48	73	28	1.50
26	131.70	140	16	48	73	28	1.50
27	136.74	145	16	48	73	28	1.50
28	141.79	150	16	48	73	28	1.60
29	146.83	155	16	48	73	28	1.70
30	151.87	161	16	48	73	28	1.80
31	156.92	166	16	48	73	28	1.80
32	161.96	171	16	48	73	28	1.90
33	167.01	176	16	48	73	28	2.00
34	172.05	181	16	48	73	28	2.10
35	177.10	186	16	48	73	28	2.20
36	182.14	191	19	52	83	35	2.70	SS41(BW TYPE)
37	187.19	196	19	52	83	35	2.80
38	192.24	201	19	52	83	35	2.90
39	197.29	206	19	52	83	35	3.00
40	202.33	211	19	52	83	35	3.10
41	207.38	216	19	52	83	35	3.20
42	212.43	221	19	52	83	35	3.30
43	217.48	226	19	52	83	35	3.40
44	222.53	231	19	52	83	35	3.50
45	227.58	237	19	52	83	35	3.60
46	232.63	242	19	52	83	35	4.00
48	242.73	252	19	52	83	35	4.00
50	252.83	262	19	52	83	35	4.20
54	273.02	282	19	52	83	35	4.80
60	303.33	312	19	52	83	35	5.60

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :8T=23.00mm,9T=28.96mm, 10T=34.04, 11T=39.12mm, 12=49.02mm.
2. B-type solid sprockets over 35 teeth made by S35C are available.

Print This Product

ANSI 60 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	49.78	57	10	15.9	37.3	31.8	0.35	* * * * S35C (B TYPE)
9	55.70	63	10	24	43	32	0.40
10	61.65	70	14	30	49	32	0.49
11	67.62	76	14	32	51	32	0.60
12	73.60	83	14	32	51	32	0.69
13	79.60	89	14	35	57	32	0.81
14	85.61	95	16	38	62	32	0.96
15	91.62	101	16	42	68	32	1.10
16	97.65	107	16	45	73	32	1.30
17	103.67	113	16	45	73	32	1.40
18	109.71	119	16	50	83	40	2.00
19	115.74	126	16	50	83	40	2.10
20	121.78	132	16	50	83	40	2.20
21	127.82	138	16	50	83	40	2.30
22	133.86	144	16	50	83	40	2.50
23	139.90	150	16	50	83	40	2.50
24	145.95	156	16	50	83	40	2.60
25	151.99	162	16	50	83	40	2.70
26	158.04	168	16	50	83	40	2.90
27	164.09	174	16	50	83	40	3.00
28	170.14	180	16	50	83	40	3.10
29	176.20	187	16	50	83	40	3.20
30	182.25	193	20	50	83	40	3.40
31	188.30	199	20	50	83	40	3.55	SS41(BW TYPE)
32	194.35	205	20	50	83	40	3.70
33	200.41	211	20	50	83	40	3.85
34	206.46	217	20	50	83	40	4.00
35	212.52	223	20	50	83	40	4.20
36	218.57	229	20	50	83	40	4.40
37	224.63	235	20	50	83	40	4.60
38	230.69	241	20	50	83	40	4.80
39	236.74	247	20	50	83	40	4.95
40	242.80	253	20	50	83	40	5.10
41	248.36	260	20	63	93	45	5.50
42	254.92	260	20	60	93	45	6.00
45	273.09	284	20	60	93	45	6.70
48	291.27	302	20	60	93	45	7.40
50	303.39	314	20	60	93	45	7.90
54	327.63	338	20	60	93	45	8.90
60	363.99	375	20	60	93	45	10.60

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumstance of hub. Groove diameters(dg) are :8T=27.30mm,9T=33.20mm, 10T=39.50mm, 11T=45.80mm
2. B-type solid sprockets over 35 teeth made by S35C are available.

Print This Product

ANSI 80 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	66.37	76	11	25.4	44.5	41.3	0.7	* * S35C (B TYPE)
9	74.27	85	11	35	58	40	0.8
10	82.19	93	17	32	52	40	0.9
11	90.16	102	17	38	60	40	1.2
12	98.14	110	17	42	67	40	1.5
13	106.14	118	17	48	77	40	1.9
14	114.15	127	17	48	77	40	2.0
15	122.17	135	20	60	93	40	2.6
16	130.20	143	20	60	93	40	2.8
17	138.23	151	20	60	93	40	3.0
18	146.27	159	20	60	93	40	3.2
19	154.32	167	20	60	93	40	3.4
20	162.37	176	20	60	93	40	3.6
21	170.42	184	20	65	93	40	3.8
22	178.48	192	20	65	107	45	4.8	SS41(BW TYPE)
23	186.54	200	20	65	107	45	5.1
24	194.60	208	20	65	107	45	5.4
25	202.66	216	20	65	107	45	5.6
26	210.72	224	20	65	107	45	5.9
27	218.79	233	20	65	107	45	6.1
28	226.86	241	20	65	107	45	6.5
29	234.93	249	20	65	107	45	6.8
30	243.00	257	20	65	107	45	7.1
31	251.07	265	20	65	107	45	7.5
32	259.14	273	20	65	107	45	7.8
33	267.21	281	20	65	107	45	8.2
34	275.29	289	20	65	107	45	8.5
35	283.36	297	20	65	107	45	8.9
36	291.43	306	20	70	117	50	10.1
37	299.51	314	20	80	117	50	10.5
38	307.58	322	20	70	117	50	10.9
40	323.74	338	20	70	117	50	11.8
41	331.81	346	20	80	117	50	12.5
42	339.89	354	20	70	117	50	12.7
43	347.47	362	20	80	117	50	13.2
44	356.04	370	20	80	117	50	13.8
45	364.12	378	20	70	117	50	14.2
46	372.20	387	20	80	117	50	15.1
47	380.20	395	20	80	117	50	15.4
48	388.36	403	20	70	117	50	15.8
49	396.44	411	20	80	117	50	17.0
50	404.52	419	20	70	117	50	17.6
54	436.84	451	20	70	117	50	19.2
60	485.33	500	20	70	117	50	23.1

Dimension : mm

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(Dg) are :8T=36.50mm,9T=44.60mm
2. B-type solid sprockets over 21 teeth made by S35C are available.

Print This Product

ANSI 100 STANDARD SPROCKET

sumo, sprocket, ansi100, ANSI STANDARD SPROCKET, เฟืองโซ่

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
10	102.47	116	20	40	78	56	1.90	S35C (B TYPE)
11	112.70	127	20	50	91	56	2.30
12	122.67	138	20	55	98	56	2.90
13	132.67	148	20	55	98	56	3.10
14	142.68	158	20	55	107	56	3.60
15	152.71	168	20	60	117	63	4.20
16	162.74	179	20	60	117	63	4.60
17	127.79	189	20	65	117	63	5.30
18	182.84	199	20	65	117	63	5.70
19	192.90	209	20	65	117	63	6.10
20	202.96	220	20	65	127	63	6.50
21	213.02	230	20	65	127	63	7.00
22	223.10	240	20	70	127	63	7.90	SS41(BW TYPE
23	233.17	250	20	70	127	63	8.30
24	243.25	260	20	70	127	63	8.80
25	253.32	270	20	70	127	63	9.30
26	263.40	281	20	70	127	63	9.70
27	273.49	291	20	70	127	63	10.30
28	283.57	301	20	70	137	71	10.90
29	293.66	311	20	70	137	71	11.60
30	303.75	321	20	70	137	71	12.10
31	313.83	331	20	70	137	71	12.90	S35C (B TYPE) SS41(BW TYPE
32	323.92	341	20	70	137	41	13.40
33	334.01	352	20	70	137	71	14.50
34	344.11	362	20	80	137	71	16.40
35	354.20	372	20	80	137	71	17.00
36	364.29	382	20	80	137	71	17.80
37	374.38	392	20	80	137	71	18.50
38	384.48	402	20	80	137	71	19.00
39	394.57	412	20	80	137	71	19.50
40	404.67	422	20	80	147	80	20.50
41	414.77	433	20	80	147	80	21.50
42	424.86	443	20	80	147	80	22.50
43	434.96	453	20	80	147	80	23.50
44	445.06	463	20	80	147	80	24.00
45	455.16	473	20	80	147	80	25.00
48	485.45	503	20	80	147	100	29.00
50	505.65	524	20	80	147	100	30.00
54	546.05	564	20	90	147	100	37.40
55	556.15	574	20	90	147	100	38.40
60	606.67	625	20	90	147	100	45.40

Note:
1. B-type solid sprockets over 21 teeth made by S35c are availiable.

Print This Product

ANSI 120 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
10	123.29	140	25	50	78	56	3.20	S35C (B TYPE)
11	135.24	158	25	55	91	56	4.00
12	147.21	165	25	60	98	56	4.80
13	159.20	177	25	60	98	56	5.30
14	171.22	190	25	65	107	56	6.30
15	183.25	202	25	70	117	63	7.80
16	195.29	214	25	70	117	63	8.40
17	207.35	227	25	70	117	63	9.10
18	219.41	239	25	70	117	63	9.90
19	231.48	251	25	70	117	63	10.70
20	243.55	263	25	80	127	63	12.10
21	255.63	276	25	80	127	63	13.00
22	267.72	288	30	80	127	63	13.40	SS41(BW TYPE)
23	279.80	300	30	80	127	63	14.20
24	291.90	312	30	80	127	63	15.20
25	303.99	324	30	80	127	63	16.20
26	316.09	337	30	80	127	63	17.20
27	328.19	349	30	80	127	63	19.20
28	340.29	361	30	85	137	71	20.90
29	352.39	373	30	85	137	71	21.00
30	364.50	385	30	85	137	71	23.20
31	376.60	398	30	85	137	71	24.10
32	388.71	410	30	85	137	41	25.70
33	400.82	422	30	85	137	71	26.80
34	412.93	434	30	85	137	71	28.20
35	425.04	446	30	85	137	71	29.70
36	437.15	458	30	85	137	71	30.00
37	449.26	470	30	85	137	71
38	461.38	483	30	85	137	71	31.40
39	473.49	495	30	85	137	71
40	485.60	507	30	90	147	80	38.20
41	497.72	519	30	90	147	80
42	509.84	531	30	90	147	80	42.00
43	521.95	543	30	90	147	80
45	546.19	568	30	90	147	80	47.60
48	582.54	604	30	60	147	80	53.00
50	606.78	628	30	90	147	100	53.80
54	655.26	677	30	90	147	100	54.70
55	667.38	689	30	90	147	100
56	679.50	701	30	90	147	100
57	691.63	713	30	90	147	100
58	703.75	726	30	90	147	100
60	727.99	750	30	90	147	100	67.80

Note:
1. B-type solid sprockets over 21 teeth made by S35c are availiable

Print This Product

BS06B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	24.88	28.0	8	10	19	19	0.02	* * * * * * S35C (B TYPE)
9	27.84	31.0	8	11	22	20	0.06
10	30.84	34.0	8	12	25	20	0.08
11	33.81	37.0	8	14	27	20	0.09
12	36.80	40.0	9	16	31	20	0.12
13	39.80	43.0	9	18	32	20	0.12
14	42.81	46.3	9	16	32	20	0.12
15	45.81	49.3	9	22	35	20	0.16
16	48.82	52.3	9	23	37	20	0.19
17	51.84	55.3	11	25	41	20	0.22
18	54.85	58.3	11	28	44	20	0.25
19	57.87	61.3	11	29	47	20	0.28
20	60.89	64.3	11	32	50	20	0.32
21	63.91	68.0	11	32	53	20	0.36
22	66.93	71.0	11	32	53	20	0.37
23	69.95	73.5	11	32	53	20	0.38
24	72.97	77.0	11	32	53	22	0.43
25	76.00	80.0	11	32	53	22	0.44
26	79.02	83.0	11	32	53	22	0.45
27	82.05	86.0	11	32	53	22	0.46
28	85.07	89.0	11	32	53	22	0.48
29	88.10	92.0	11	32	53	22	0.49
30	91.12	94.7	11	32	53	22	0.51	S35C (B TYPE)
31	94.15	98.3	11	32	53	22	0.52
32	97.18	101.3	11	32	53	22	0.54
33	100.20	104.3	11	32	53	22	0.56
34	103.23	107.3	11	32	53	22	0.57
35	106.26	110.4	11	32	53	22	0.59
36	109.29	113.4	11	32	53	22	0.61
37	112.31	116.4	11	32	63	22	0.77
38	115.34	119.5	11	32	63	25	0.82
39	118.37	122.5	11	32	63	25	0.83
40	121.40	125.5	11	32	63	25	0.85
41	124.43	128.5	11	40	63	25	0.85	SS41 (BW TYPE
42	127.46	131.6	15	40	63	25	0.92
43	130.48	134.6	15	40	63	25	0.92
44	133.53	137.6	15	40	63	25	0.92
45	136.55	140.7	15	40	63	25	0.95
46
48	145.64	149.7	15	40	63	25	1.00
50	151.69	155.7	15	40	63	25	1.05
52
54	163.80	167.8	15	40	63	25	1.20
60	181.99	186.0	15	40	63	25	1.30

Note:
1.Sprocket marked with an asterisk (*) has a groove at the extternal circumference of hub. Groove diameter(Dg) are:8T =14.00mm, 9T=16.00mm,10T=18.00, 11T =22.00mm, 12T=24.00mm, 13T=28.00mm
2. B-type solid sprockets over 40 teeth made by S35C are availiable

Print This Product

BS08B STANDARD SPROCKET

sumo, เฟืองโซ่, เฟืองคอนเวเยอร์, เฟือง, STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	33.20	37.2	9	12.7	24.6	22.2	0.10	* * * * S35C (B TYPE)
9	37.13	41.0	9	14	28	22	0.11
10	41.10	45.2	9	18	32	22	0.14
11	45.08	48.7	10	23	37	22	0.19
12	49.07	53.0	10	25	40	22	0.22
13	53.07	57.4	13	23	37	22	0.23
14	57.07	61.8	13	26	42	22	0.28
15	61.08	65.5	13	28	46	22	0.34
16	65.10	69.5	13	30	50	22	0.40
17	69.12	73.6	13	32	54	22	0.46
18	73.14	77.8	13	32	57	22	0.51
19	77.16	81.7	13	38	62	22	0.59
20	81.18	85.8	14	42	67	25	0.76
21	85.21	89.7	14	45	71	25	0.85
22	89.24	93.8	11	48	75	25	0.95
23	93.27	98.2	14	48	77	25	1.00
24	97.30	101.8	14	40	63	25	0.84
25	101.33	105.8	14	40	63	25	0.88
26	105.36	110.0	14	40	63	25	0.92
27	109.40	114.0	14	40	63	25	0.96
28	113.43	118.0	14	40	63	25	1.00	S35C (B TYPE)
29	117.46	122.0	14	40	63	25	1.05
30	121.50	126.1	14	40	63	25	1.10
31	125.53	130.2	14	40	63	25	1.20
32	129.57	134.3	14	45	68	28	1.30
33	133.61	138.4	14	45	68	28	1.30
34	137.64	142.6	14	45	68	28	1.30
35	141.68	146.7	14	45	68	28	1.40
36	145.72	151.0	17	45	68	28	1.40	SS41(BW TYPE)
38	153.79	158.6	17	45	68	28	1.50
40	161.87	166.8	17	45	68	28	1.60
41	165.91	171.4	17	48	73	32	1.80
42	169.95	175.4	17	48	73	32	1.90
43	173.98	179.4	17	48	73	32	2.00
44	178.02	183.8	17	48	73	32	2.10
45	182.06	188.0	17	48	73	32	2.20
48	194.18	200.3	17	48	73	32	2.40
50	202.26	208.3	17	48	73	32	2.54
54	218.42	224.1	17	48	73	32	2.84
60	242.66	248.6	17	48	73	32	3.30

Note:
1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =18.00mm, 9T=21.00mm,10T=25.00, 11T =30.00mm, 12T=32.00mm
2. B-type solid sprockets over 35 teeth made by S35C are availiable

Print This Product

BS10B STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	41.48	47.0	9	15.9	28.6	25.4	0.19	* * * * * * S35C (B Type)
9	46.41	52.6	10	19	34	25	0.20
10	51.38	57.5	10	22	40	25	0.27
11	56.35	63.0	13	24	46	25	0.33
12	61.34	68.0	13	30	51	25	0.41
13	66.34	73.0	13	30	51	25	0.46
14	71.34	78.0	13	32	52	25	0.52
15	76.35	83.0	13	36	57	25	0.62
16	81.37	88.0	13	40	62	25	0.72
17	86.39	93.0	13	42	67	25	0.83
18	91.42	98.3	13	48	72	28	1.00
19	96.45	103.3	13	48	73	28	1.10
20	101.48	108.4	14	48	73	28	1.20
21	106.51	113.4	14	48	73	28	1.20
22	111.55	118.0	16	48	73	28	1.30
23	116.58	123.4	16	48	73	28	1.30
24	121.62	128.3	16	48	73	28	1.45
25	126.66	134.0	16	48	73	28	1.50
26	131.70	139.0	16	48	73	28	1.50
27	136.74	144.0	16	48	73	28	1.50
28	141.79	148.7	16	48	73	28	1.60
29	146.83	153.8	16	48	73	28	1.70
30	151.87	158.8	16	48	73	28	1.80	S35C (B TYPE)
31	156.92	163.9	16	48	73	28	1.80
32	161.96	168.9	16	48	73	28	1.90
33	167.01	174.5	16	48	73	28	2.00
34	172.05	179.0	16	48	73	28	2.10
35	177.10	184.1	16	48	73	28	2.20
36	182.14	198.1	19	52	83	35	2.70	SS41 (BW TYPE)
37	187.19	194.2	19	52	83	35	2.80
38	192.24	199.2	19	52	83	35	2.90
39	197.29	204.2	19	52	83	35	3.00
40	202.33	209.3	19	52	82	35	3.10
41	207.38	214.8	19	52	83	35	3.20
42	212.43	219.9	19	52	83	35	3.30
43	217.48	224.9	19	52	83	35	3.40
44	222.53	230.0	19	52	83	35	3.50
45	227.58	235.0	19	52	83	35	3.60
46	232.63	240.1	19	52	83	35	4.00
48	242.73	250.2	19	52	83	35	4.00
50	252.83	260.3	19	52	83	35	4.20
54	273.02	280.5	19	52	83	35	4.80
60	303.33	310.8	19	52	83	35	5.60

Note:
1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =22.00mm, 9T=27.00mm,10T=32.04, 11T =37.00mm, 12T=42.00mm, 13T=47.00mm
2. B-type solid sprockets over 35 teeth made by S35C are availiable

Print This Product

BS12B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	49.78	57.6	10	15.9	37.3	31.8	0.35	* * * * S35C (B TYPE)
9	55.70	62.0	10	24	43	32	0.40
10	61.65	69.0	14	30	49	32	0.49
11	67.62	75.0	14	32	51	32	0.60
12	73.60	81.50	14	32	51	32	0.69
13	79.60	87.5	14	35	57	32	0.81
14	85.61	93.6	16	38	62	32	0.96
15	91.62	99.8	16	42	68	32	1.10
16	97.65	105.5	16	45	73	32	1.30
17	103.67	115.5	16	45	73	32	1.40
18	109.71	118.0	16	50	83	40	2.00
19	115.74	124.2	16	50	83	40	2.10
20	121.78	129.7	16	50	83	40	2.20
21	127.82	136.0	16	50	83	40	2.30
22	133.86	141.8	16	50	83	40	2.50
23	139.90	149.0	16	50	83	40	2.50
24	145.95	153.9	16	50	83	40	2.60
25	151.99	160.0	16	50	83	40	2.70
26	158.04	165.9	16	50	83	40	2.90
27	164.09	172.3	16	50	83	40	3.00
28	170.14	178.0	16	50	83	40	3.10	S35C (B TYPE)
29	176.20	184.1	16	50	83	40	3.20
30	182.25	190.5	20	50	83	40	3.40
31	188.30	196.3	20	50	83	40	3.55	SS41(BW TYPE)
32	194.35	203.3	20	50	83	40	3.70
33	200.41	209.3	20	50	83	40	3.85
34	206.46	214.6	20	50	83	40	4.00
35	212.52	221.0	20	50	83	40	4.20
36	218.57	226.8	20	50	83	40	4.40
37	224.63	232.9	20	50	83	40	4.60
38	230.69	239.0	20	50	83	40	4.80
39	236.74	245.1	20	50	83	40	4.95
40	242.80	251.3	20	50	83	40	5.10
41	248.36	257.3	20	60	93	45	5.50
42	254.92	264.5	20	60	93	45	6.00
45	273.09	282.5	20	60	93	45	6.70
48	291.27	300.1	20	60	93	45	7.40
50	303.39	312.3	20	60	93	45	7.90
54	327.63	336.6	20	60	93	45	8.90
60	363.99	373.0	20	60	93	45	10.60

Note: 1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =27.00mm, 9T=32.00mm,10T=37.00, 11T =45.00mm 2. B-type solid sprockets over 30 teeth made by S35C are availiable

Print This Product

BS16B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	Btype/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	66.37	77.0	11	25	44.5	41.3	0.7	S35C (B TYPE)
9	74.27	85.0	11	35	58	40	0.8
10	82.19	93.0	17	32	52	40	0.9
11	90.16	99.5	17	38	60	40	1.2
12	98.14	109.0	17	42	67	40	1.5
13	106.14	117.0	17	48	77	40	1.9
14	114.15	125.0	17	48	77	40	2.0
15	122.17	133.0	20	60	93	40	2.6
16	130.20	141.0	20	60	93	40	2.8
17	138.23	149.0	20	60	93	40	3.0
18	146.27	157.0	20	60	93	40	3.2
19	154.32	165.2	20	60	93	40	3.4
20	162.37	173.2	20	60	93	40	3.6
21	170.42	181.2	20	60	93	40	3.8
22	178.48	189.3	20	65	107	45	4.8	SS41 (BW TYPE)
23	186.54	197.5	20	65	107	45	5.1
24	194.60	205.5	20	65	107	45	5.4
25	202.66	213.5	20	65	107	45	5.6
26	210.72	221.6	20	65	107	45	5.9
27	218.79	229.6	20	65	107	45	6.1
28	226.86	237.7	20	65	107	45	6.5
29	234.93	245.8	20	65	107	45	6.8
30	243.00	254.0	20	65	107	45	7.1
31	251.07	262.0	20	65	107	45	7.5
32	259.14	270.0	20	65	107	45	7.8
33	267.21	278.5	20	65	107	45	8.2
34	275.29	287.0	20	65	107	45	8.5
35	283.36	296.2	20	65	107	45	8.9
36	291.43	304.6	20	70	117	50	10.1
37	299.51	312.6	20	80	117	50	10.5
38	307.58	320.7	20	70	117	50	10.9
40	323.74	336.9	20	70	117	50	11.8
41	331.81	345.0	20	80	117	50	12.5
42	339.89	353.0	20	70	117	50	12.7
43	347.97	361.1	20	80	117	50	13.2
44	356.04	369.1	20	80	117	50	13.8
45	354.12	377.1	20	70	117	50	14.2
46	372.20	385.2	20	80	117	50	15.1
47	380.28	393.2	20	80	117	50	15.1
48	388.36	401.3	20	70	117	50	15.8
49	396.44	409.3	20	80	117	50	17.0
50	404.52	417.4	20	70	117	50	17.6
54	436.84	448.3	20	70	117	50	19.2
60	485.33	498.3	20	70	117	50	23.1

Note:
1. Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:
8T =36.00mm, 9T=44.00mm
2. B-type solid sprockets over 21 teeth made by S35C are availiable

Short pitch precision roller chains(A series) Ansi Roller chain

SHORT PITCH PRECISION ROLLER CHAINS(A SERIES) ANSI ROLLER CHAIN

Short pitch precision roller chain(B series) BS Roller chain, simplex roller chains

SHORT PITCH PRECISION ROLLER CHAIN(B SERIES) BS ROLLER CHAIN, duplex roller chain

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, A-1, K-1

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WA-1, WA-2, WK-1, WK-2

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WSA-1, WSA-2, WSK-1, WSK-2

DOUBLE PITCH CONVEYOR CHAINS, small roller type

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

Stainless Steel Chains

LEAF CHAINS

Solid Pin Chain

HAND GLOVE CHAIN

RICE MILL CONVEYOR CHAIN, C2080HF6

ANSI 25 STANDARD SPROCKET

ANSI 35 Standard Sprocket

ANSI 40 STANDARD SPROCKET

ANSI 50 STANDARD SPROCKET

ANSI 60 STANDARD SPROCKET

ANSI 80 STANDARD SPROCKET

ANSI 100 STANDARD SPROCKET

ANSI 120 STANDARD SPROCKET

BS06B STANDARD SPROCKET

BS08B STANDARD SPROCKET

BS10B STANDARD SPROCKET

BS12B STANDARD SPROCKET

BS16B STANDARD SPROCKET

chain & power transmission unit component

Valve

gasket & seal

clamp

Others

Brands