Brands | ห้างหุ้นส่วนจำกัดฮะเซ้งพาณิชย์ เป็นผู้นำเข้าและตัวแทนจำหน่ายสินค้าสำหรับโรงงานอุตสาหกรรมประเภท วาล์ว ปะเก็น เฟืองโซ่ โซ่ขับ โซ่ลำเลียง คัปปิ้งโซ่ เหล็กรัด และอื่นๆ, HAH SENG TRADING

Model No. F601 Gate Valve

This valve is deal for sanitary and watering plants

Body in Hot pressed brass
Wheel in iron
Bonnet in brass
Packing nut in brass
Baffle in brass
Bonnet washer in fiber
Stem washer in Teflon
Thread end : BSP

bar(max)	10	10	10	10	10	10	16	16	16
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
L	38	41	44	50	51	60	60	74	85
H	53	63	75	87	94.5	119.5	156	183	227.5
D	50	50	60	60	70	70	90	100	120
Weight(g)	165	200	270	430	565	955	1800	2500	4200
BOX(pcs)	20	20	15	10	12	3	-	-	-
CARTON(pcs)	120	80	60	40	48	12	12	8	4

Model No. F603 Gate Valve

This valve is designed for verticle, horizontal or anhled installation for use in residential and commercial plumbing, sanitary, autoclaves, pump and compressed air systems.

Body from 1/2″-3″ in hot pressed brass
Body 4″ in casting brass
Handle-wheel in aluminium
Packing nut in brass
Non-rising spindle in brass
Wedge in brass
Fiber gasket

bar(max)	20	20	20	20	20	20	20	20
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"
L	44	48	54	60	64	72	80	85
H	82	92	103	120	133	147	184	205
D	55	60	65	75	80	90	110	120
Weight(g)	250	375	500	780	1010	1465	2280	3125

MODEL NO. 200B Globe Valve

SS316 Globe Valve
Investment Casting
Handle Wheel Operation
Screwed End
Working Pressure : 200 WOG
Size : 1/4″-2″

MODEL NO. BOO Globe Valve

SS 304 Globe Valve
Bolted Bonnet Outside Screw and Yoke
Rising Stem and Handle Wheel Yoke
Intergral with Bonnet
Renewable Seat Ring, Loose Disc
Flanged End 10k
Working Pressure: Sheel : 450 PSI (water)
Seat: 315 PSI (water) ; 80 PSI (air)
Size : 1/2″-6″

MODEL No. 191 SPRING CHECK VALVE

Technical Specification
Body:	Hot Press Brass OT58
Threads:	ISO228/1
Stem Seat:	Nylon Plast A.P.Q.
Seat:	Rubber NBR
Spring :	AISI 302 Stainless Steel
Working Temperatures:	air -20°C + 100°C water 0°C + 90°C
Working Pressure:	PN 10 bar

Model No. F201 Spring Check Valve

This Valve is ideal for all types of plants:hydraulic, pneumatic and heating plants. It is suitable to install in horizontal, vertical or oblique position

Body in hot pressed brass bar
seals in NBR-rubber
Spring in stainless steel AISI 304
Washerholder inNylon
Max. working temerature=110°C
Opening pressure = 0.03 bar
Thread end : BSP

Spring Check Valve, เช็ควาล์ว, สปริงเช็ควาล์ว

bar(max)	16	16	16	10	10	10	8	8	8
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
L	33	42	47.5	59	67.5	81	103	111	140.5
H	45	48	56	61	68	77	93	95	107
Weight(g)	120	180	240	330	500	700	1550	1900	3100
BOX(pcs)	19	12	9	6	6	3	2	2	-
CARTON(pcs)	228	144	108	72	36	18	12	12	8

MODEL NO. 200SC spring Check Valve

Design Standard ANSI B16.10
Investment Casting Body and Cap
Testing Standard: API598, EN12266
Opening Pressure : 5 – 8 BAR
Size : 1/2″ – 2″

MODEL No. 180 CHECK VALVE

Technical Specification
Body:	Brass
Bonnet:	Brass
Disc:	Brass
Working Pressure:	PN 16 bar

Model No. F501 Swing check Valve

F501 Swing check Valve,เช็ควาล์ว, สปริงเช็ควาล์ว, สวิงเช็ควาล์ว, Check Valve, Swing check Valve, FDH

This valve is ideal for hydro heating and pneumatic plants

1/2″ to 2″ in hot pressed brass
2-1/2″ to 4″ in casting brass
Seals in
Max. working temerature=110°C
Opening pressure = 0.03 bar
Thread end : BSP

bar(max)	16	16	16	10	10	10	8	8	8
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
L	47	53	63	70	88	97	120	135	162
H	48.5	56.5	63.5	78	98	109	130	145	180
Weight(g)	180	240	350	550	880	1200	1780	2900	5000
BOX(pcs)	18	10	8	6	4	3	-	-	-
CARTON(pcs)	216	120	96	36	24	18	12	8	4

MODEL NO. 200S Swing Check Valve

SS316 Swing Check Valve
Investment Casting
Screwed End
Working Pressure : 200 WOG
Size : 1/2″-2″

MODEL NO. COO Swing Check Valve

SS 304 Swing Check Valve
Bolted Cover, Swing Type
Flanged End 10K
Working Pressure; Sheel: 450 PSI (water),
Seat: 315 PSI (water) ; 80 PSI (air)
Size : 1/2″-6″

MODEL C101 Dual Flap Check Valve

Body	Cast Iron
Disc	AISI 316
Seat	EPDM
Stem	Stainless Steel
Spring	Stainless Steel
Applicable Fluids: Water, Warm Water, Sea Water, Air & Weak Acid

Maximum Non-shock Service Pressure
	50 to 300mm	350 to 600mm
Seat Test Pressure (bar)	13.7	10
Shell Test Pressure (bar)	20	16
Flanged Standard : JIS 10k, ANSI 150 PSI, DIN 10/16

MODEL NO. KH-11C Wafer Disc Check Valve

Investment Casting Bosy
Flange Standard PN10/25/40
ANSI#150/#300
Size 1/2″, 3/4″, 1″, 1.1/4″, 2″, 21/2″, 4″
Can Use in 10K
Material SS316
Maximum Working Temp:400°C
Opening Minimum Pressure 3-5 Bar
Size 1/2″ -6 “

MODEL No. 170 STRAINER VALVE

วายสเตรนเนอร์วาล์ว, MODEL: 170 STRAINER VALVE

Technical Specification
Body:	Bronze 838 B 584 ASTM, Sand -blast finishing
Cap:	Brass(P-OT58 Pb UNI 5706-65)
Threads:	ISO228/1
Strainer:	AISI 304 Stainless Steel
Working Pressure:	PN 20bar

Model No. F503 Y-Strainer

This Valve is ideal for all types of plants:hydraulic, pneumatic and heating plants. It is suitable to install in horizontal, vertical or oblique position

Body in hot pressed brass bar
seals in NBR-rubber
Spring in stainless steel AISI 304
Washerholder inNylon
Max. working temerature=110°C
Opening pressure = 0.03 bar
Thread end : BSP

bar(max)	16	16	16	10	10	10	8	8	8
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
L	33	42	47.5	59	67.5	81	103	111	140.5
H	45	48	56	61	68	77	93	95	107
Weight(g)	120	180	240	330	500	700	1550	1900	3100
BOX(pcs)	19	12	9	6	6	3	2	2	-
CARTON(pcs)	228	144	108	72	36	18	12	12	8

MODEL NO. 600S Y-Strainer

SS 316 Y-Strainer
nvestment Casting, Full Bore
Screen Mesh: 0.6mm
Screwed End
Working Pressure : 800 WOG
Size: 1/4″ – 2″

MODEL NO. SOO Y-Strainer

SS 304 Y-Strainer
Flanged End 10K
Working Pressure: Sheel : 450 PSI (water)
Seat: 315 PSI (water) ; 80 PSI (air)
Size : 1/2″ – 6″

Model NO. A101&A102 Butterfly Valve

Model A101&A102 Butterfly Valve, วาล์วปีกผีเสื้อ

Operating Pressure : 200PSI – 2″to 12″,150PSI -14″
Operating Temperature : 110°c
Applicable Fluids : Water, Warm water,Sea Water, Air & Weak Acid
Flanges Fluids : JIS 10K, ANSI 150 PSI, DIN 10/16

Body	Cast Iron(GG25)
Liner	EPDM
Disc	A101-ANSI316 / A102-Cast Iron with nickel plated
Shaft	AISI 416
Bushing	Teflon
O-ring	Buna-N
Washer	Steel
Circlip	Steel

MODEL No. 686 BIBCOCK

Technical Specification
Body:	OT.58 UNI 5705 -65
Ring Nut:	OT.58 UNI 5705 -65
Ball:	OT.58 UNI 5705 -65
Ball Seat:	PTFE
O-ring:	NBR
Stem	OT.58 UNI 5705 -65
Handle:	UNI 5076
Screw	UNI 5771
Temperature Range :	0°C + 80°C
Working Pressure	PN16 Bar

MODEL No. 689 HOSE BIBCOCK

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Ball:	CW617N Forged and Hard Chromed
Threads:	ISO228/1
Levers:	UNI-EN 1706 Aluminium Epoxy Enamelled Brass Handle
Ball Seals	2PTFE
Spindle	Brass CW614 (Blow out Proof)
Spindle Seals	2 O-Ring NBR
Temperature Range :	-20°C + 120°C
Working Pressure	PN16 Bar

MODEL No. 679 LOCKABLE BIBCOCK

Technical Specification
Body:	OT.58 UNI 5705 -65
Ring Nut:	OT.58 UNI 5705 -65
Ball:	OT.58 UNI 5705 -65
Ball Seat:	PTFE
O-ring:	NBR
Stem	OT.58 UNI 5705 -65
Handle:	Fe P13
Screw	UNI 5771
Temperature Range :	0°C + 80°C
Working Pressure	PN16 Bar

MODEL No. 682 LOCKABLE HOSE BIBCOCK

Technical Specification
Body:	CW617N
End Connection:	CW617N
Ball:	CW617N
Ball Seats :	PTFE
O-ring:	NBR
Stem:	PTFE
Handle:	Fe P13
Lockpin	UNI ISO 8752
Anti-Splash Device:	CW614N
Bibcock:	CW614N
Temperature Range :	0°C + 80°C
Working Pressure	PN16 Bar

MODEL No. 194 FOOT VALVE

MODEL:194 FOOT VALVE, BIBCOCK, ก๊อก, บอลก๊อก,

Technical Specification
Body:	Brass
Body End:	Nylon
Disc:	Nylon
Gasket Disc:	NBR
Threads:	ISO228/1
Spring :	AISI 302 Stainless Steel
Filter:	AISI304 Stainless Steel
Working Temperatures:	air -20°C + 100°C water 0°C + 90°C
Working Pressure :	PN 10 bar

PVC Foot Valve

Material: PVC-U
End Connector: Thread, Socket
Size : 3/4″-2″

MODEL No. AK-1H (Inverted bucket type) STEAM TRAPS

Application	Steam
Applicable Pressure	0.35~7K 0.35~10K
Applicable Temperature	MAX. 220°C
End connection	Screwed JIS Rc
Materials	Body : Cast iron Disc & Seat : Stainless Steel

MODEL No. ATB-5 (THERMOSTATIC TYPE) STEAM TRAPS

Application	Steam
Applicable Pressure	MAX. 10K {1.0MPa}
Applicable Temperature	MAX. 184°C
End connection	Screwed JIS Rc
Materials	Body : Cast iron Disc & Seat : Stainless Steel Cock : Cast bronze Bellows : Stainless Steel

TLV Streamtraps

Streamtraps
Pressure/temp. Controls
Air& gas Traps
Separators
Air Vents
Measurement Instument
Sight Glasses

MODEL No. SL-37 (WITH LEVER) SAFETY RELIEF VALVES

Application	Steam, air, gases liquids
Applicable Press	0.5~10K {0.05~1.0MPa}
Applicable Temp.	Max 225°C
Adjustable range of spring	0.5~1, 1~2, 2~5, 5~10K (0.05~0.1, 0.1~0.2, 0.2~0.5, 0.5~1.0 Mpa)
End connection	Screwed JIS Rc
Material	Spring Case : Case Bronze Disc & Seat ring : Stainless Steel Stl. Adjusting Spring : Stainless Steel

MODEL No. SL-38 (WITHOUT LEVER) SAFETY RELIEF VALVES

Application	Steam, air, gases liquids
Applicable Press	0.5~10K {0.05~1.0MPa}
Applicable Temp.	Max 225°C
Adjustable range of spring	0.5~1, 1~2, 2~5, 5~10K (0.05~0.1, 0.1~0.2, 0.2~0.5, 0.5~1.0 Mpa)
End connection	Screwed JIS Rc
Material	Spring Case : Case Bronze Disc & Seat ring : Stainless Steel Stl. Adjusting Spring : Stainless Steel

MODEL No. SL-23-H (WITH LEVER) SAFETY VALVES (LIFT TYPE)

Application	Steam and air
Applicable Press	0.35~10K {0.035~1.0MPa}
Applicable Temp.	-5-230°C
End connection	Flanged JIS10KFF
Material	Body : Cast iron Disc & Seat ring : Stainless Steel Or Cast Bronze

MODEL No. SF-13 (WITH LEVER) SAFETY VALVES (FULL BORE TYPE)

Application	Steam and air
Applicable Pressure	1~10K {0.1~1.0MPa}
Applicable Temperature.	-5-230°C
End connection	Inlet : Flanged JIS 10KFF Outlet Flanged JIS 10KFF
Material	Body : Cast iron Disc & Seat ring : Stainless Steel Disc & Seat ring : Stellited

MODEL No. PS-12 SOLENOID VALVES

Operation	Energized Open
Application	Steam, water, air and oils
Applicable Pressure	0~10K {0~1.0MPa}
Applicable Temperature	5-180°C (For Hot Water : Max 100°C)
Rated Voltage	Common use : AC100V/200V, 50/60Hz or AC 110/220V 60Hz
End connection	Screwed JIS Rc
Material	Body : Cast Bronze Disc : Stainless Steel With Tefleon Tip

MODEL No. TD-8 TEMPERATURE REGULATING VALVES

Application	Steam and Water
Use	Heating
Fluid to be heated or cooled	Water, oils, other liquids and gases
Adjustable temp. range	40-100°C
Seat type	Single seated
End Connection	Screwed JIS PT
Applicable temp. for body	Max.220°C
Length of capillary tube	2 metres (Up to 5 metres is available upon request)
Materials	Body : Cast Bronze Disc : Phosphor cast bronze Bellows : Phosphor bronze Thermo bulb (liquid use) : Copper tube, chrome plated Thermo bulb (gas use) : Copper tube with aluminum fin Stainless Steel thermo bulb for liquid or gas is availble

MODEL No. AF-4S

Application	Cold or hot water and oils
Applicable Pressure	MAX. 10K {1.0MPa}
Applicable Temperature	5-90°C
End connection	Screwed JIS Rc
Materials	Body : Cast iron Disc & Seat : Stainless Steel Seat : Brass & Synthetic rubber

MODEL No. RP-6 PRESSURE REDUCING VALVES

Application	Steam
Applicable primary Press.	MAX. 10K {1.0MPa}
Applicable secondary Press.	0.3~8K
Applicable Temp.	Below 220°C
End connection	Flanged JIS10KFF
Materials	Body : Cast iron Disc & seat : Stainless Steel Diaphragm : Stainless Steel

MODEL No. RP-7 PRESSURE REDUCING VALVES

Application	Steam
Applicable primary Press.	Max. 16K{1.6MPa}
Applicable secondary Press.	Normal Pressure- Medium Pressure
Applicable Temp.	Below 220°C
End connection	Screwed JIS Rc
Materials	Body : Cast Bronze Disc & seat : Stainless Steel Diaphragm : Stainless Steel Piston & Cylinder : Cast bronze Stainless steel is also available

MODEL No. RD-31 PRESSURE REDUCING VALVES

Application	Water and hot water
Applicable primary Press.	Max. 10K {1.0MPa}
Applicable secondary Press.	Spring range L: 0.5~3.5K
Applicable Temperature	5-90°C
End connection	Screwed JIS Rc
Materials	Body : Cast Bronze Trim : Cast Bronze Diaphragm & Disc : NBR

Model NO. 10CIBF & 125 CIBF PP cast iron ball valve

NO.	PART NAME	MATERIAL
Materials list
1	BODY	FC20
2	CAP	FC20
3	BALL	CF8
4	SEAT	PTFE
5	STEM	SUS304
6	GASKET	PTFE
7	THRUST WASHER	PTFE
8	PACKING	PTFE
9	STEM PACKING	PTFE
10	GLAND	S41C
11	GLAND BOLT	S41C
12	HANDLE	WCB
13	STOPPER	SUS304
14	SNAP RING	SUS304
15	BOLT	S41C

PP cast iron ball valve,บอลวาล์ว,BALL VALVE

Test Pressure: JIS10K
SHELL(BY WATER)		2.1 MPa
SHELL(BY WATER)		21.5Kgcm²
SEAT	BY WATER	1.6 MPa
	BY WATER	16.5Kg/cm²
	BY AIR	0.6MPa
	BY AIR	6Kg/cm²

Test Pressure: ANSI125
SHELL(BY WATER)		450PSI
SHELL(BY WATER)		32Kgcm²
SEAT	BY WATER	315PSI
	BY WATER	22Kg/cm²
	BY AIR	85PSI
	BY AIR	6Kg/cm²

JIS 10K MODEL :10CIBF
JIS 10K 2-PC FLANGE BALL VALVE

SIZE	d	D	C	T	N Ø M	L	H	W	W1	J	ISO 5211	E	Ma
DIMENSION 10CIBF
15	15	95	70	13	4-Ø 15	110	70	160	12	50	F04	42	M5
20	20	100	75	15	4-Ø 15	120	73	160	12	50	F04	42	M5
25	25	125	90	15	4-Ø 19	130	77	160	12	50	F05	50	M6
32	32	135	100	17	4-Ø 19	140	85	160	17	50	F05	50	M6
40	40	140	105	17	4-Ø 19	165	104	186	17	50	F07	70	M8
50	50	155	120	17	4-Ø 19	180	114	186	17	62	F07	70	M8
65	65	175	140	20	4-Ø 19	190	142	324	21	75	F07	70	M8
80	80	185	150	21	8-Ø 19	200	153	324	21	75	F10	102	M10
100	100	210	175	21	8-Ø 19	230	166	324	21	75	F10	102	M10
125	125	250	210	24	8-Ø 23	300	224	750	24	89	F12	125	M12
150	150	280	240	26	8-Ø 23	340	247	750	24	89	F12	125	M12

ANSI 125 MODEL: 125CIBF
CL 125 LB 2-PC FLANGE BALL VALVE

SIZE	d	D	C	T	N Ø M	L	H	W	W1	J	ISO 5211	E	Ma
DIMENSION 125CIBF
1/2"	15	89	60.5	12	4-Ø 16	108	70	160	12	50	F04	42	M5
3/4"	20	98	70.0	12	4-Ø 16	117	73	160	12	50	F04	42	M5
1"	25	108	79.5	12	4-Ø 16	127	77	160	12	50	F05	50	M6
11/4"	32	117	89.5	14	4-Ø 16	140	85	160	12	50	F05	50	M6
11/2"	40	127	98.5	16	4-Ø 16	165	104	186	17	62	F07	70	M8
2"	50	152	125.5	18	4-Ø 19	178	112	324	17	62	F07	70	M8
21/2"	65	178	139.5	20	4-Ø 19	190	142	324	21	75	F07	70	M8
3"	80	190	152.5	20	8-Ø 19	203	153	324	21	75	F10	102	M10
4"	100	229	190.5	23.9	8-Ø 19	229	166	324	21	75	F10	102	M10
5"	125	254	216.0	23.9	8-Ø 22	356	224	750	24	89	F12	125	M12
6"	150	279	241.5	25.4	8-Ø 22	394	247	750	24	89	F12	125	M12
8"	200	343	298.5	28.6	8-Ø 22	457	305	1000	32	100	F12	125	M12

Size	1/2″	3/4″	1″	1-1/4″	1-1/2″	2″	2-1/2″	3″	4″	5″	6″
JIS 10K	1,145	1.210	1,450	1,885	2,475	2,925	4,540	5.041	7,060	14,120	17,820
ANSI 125	1,110	1,180	1,515	2,035	2,590	3,025	4,640	5,480	8,335	15,125	18,820

MODEL NO. UCB01 Compact Ball Valve

Body: UPVC
Seat seal: TPE
O-Ring: EPDM
Ball: UPVC
Handle: ABS
Cap: ABS

Specification of material
NO.	PART	MATERIAL	QTY
1	Body	PVC	1
2	Seat Seal	TPE, PTFE	2
3	O-Ring	EPDM, FPM(NBR)	1
4	Ball	PVC, CPVC, PP	1
5	Handle	ABS	1
6	Cap	ABS	1

Dimensions
Nom	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	d	D	L	I	W	H1	H2
size	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	d	D	L	I	W	H1	H2
15mm(1/2″)	14	14	22	22	21.34	20	14.5	32	80	22	68.5	64.3	44.9
20mm(3/4″	14	14	26	26	26.67	25	20	36.8	92	25	80.5	76	52
25mm(1″)	11.5	11	32	34	33.4	32	24	45	106	28.0	100	94	65
32mm(1 1/4″)	11.5	11	38	42	42.16	40	30	53.5	112.5	28.0	108	106	70
40mm(1 1/2″)	11.5	11	48	48	48.26	50	34	62	129	33.0	108.5	112	73.5
50mm(2″)	11.5	11	60	60	60.33	63	44	75.5	148	39.5	138	126	81
65mm(2 1/2″)	8	11	76	76	73	75	56	92.5	177.5	39.5	192.5	166	108.5
80mm(3″)	8	11	89	89	88.9	90	71	107	209	48	192.5	181	116
100mm(4″)	8	11	114	114	114.3	110	86	134.5	294	78	262	236	151.5

MODEL NO.UTB01 True Union Ball Valve

True Union Ball Valve (UTB01),ยูเนียนบอลวาล์ว

Stem: UPVC
Handle: ABS
Stem O-Ring: EPDM
Union nut: UPVC
End connector: UPVC
Body O-Ring: EPDM
O-Ring: EPDM
Body: UPVC
Ball: UPVC
Seat seal: PTFE
Seat Carrier: UPVC
Carrier O-Ring: EPDM

Specification of material
NO.	PART	MATERIAL	QTY	NO.	PART	MATERIAL	QTY
1	Stern	PVC, CPVC, PP	1	7	O-ring	EPDM, FPM(NBR	2
2	Handle	ABS	1	8	Body	PVC, CPVC, PP	1
3	Stem O-Ring	EPDM, FPM(NBR)	2	9	Ball	PVC, CPVC, PP	1
4	Union Nut	PVC, CPVC, PP	2	10	Seat Seal	PTFE	2
5	End Connector	PVC, CPVC, PP	2	11	Seat Carrier	PVC, CPVC, PP	1
6	Body O-Ring	EPDM, FPM(NBR)	2	12	Carrier O-ring	EPDM, FPM(NBR	1

Dimensions
Nom	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	d2	D1	D	I	L1	L2	H
size	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	d2	D1	D	I	L1	L2	H
15mm(1/2″)	14	14	22	22	21-34	20	14	27.6	51.2	20.6	112.5	65	50.5
20mm(3/4″	14	14	26	26	26.67	25	18.7	35.6	65.5	24.6	130.2	75	58.5
25mm(1″)	11.5	11	32	34	33.4	32	24	41.6	73.7	28	142.5	85	65.7
32mm(1 1/4″)	11.5	11	38	42	42.16	40	32	52	86.6	31	161	97	76.5
40mm(1 1/2″)	11.5	11	48	48	48.26	50	40	59.5	102	31.5	166.5	110	86
50mm(2″)	11.5	11	60	60	60.33	63	50	75	120	40	214	133.5	101.5
65mm(2 1/2″)	8	11	76	75	73.03	75	60	87.5	135	40	228	161	112.5
80mm(3″)	8	11	89	89	88.9	90	79	107.5	188	48	269	200	160.5
100mm(4″)	8	11	114	114	114.3	110	99	132	216	56	309	240	173.5

MODEL NO. UFV01 Foot Valve

Body: UPVC
Connector: EPDM
Spring: Stainless steel
Gate: UPVC
Seal: EPDM
Body: UPVC

Specification of material
NO.	PART	MATERIAL	QTY
1	Body	PVC	1
2	Connector	EPDM, FPM(NBR)	1
3	Spring	STAINLESS STEEL	1
4	Gate	PVC	1
5	Seal	EPDM, FPM(NBR)	1
6	Body	PVC	1

วาวล์หัวกะโหลก , Foot Valves, พีวีซี,era, UFV01, วาวล์

Dimensions
Nom	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	D	D1	I	L
size	NPT Thd/in	BSPT Thd/in	JIS d	BS d	ANSI d	DIN d	D	D1	I	L
15mm(1/2″)	14	14	22	22	21-34	20	31.0	43.7	31.0	137.0
20mm(3/4″	14	14	26	26	26.67	25	35.5	43.7	32.5	141.0
25mm(1″)	11.5	11	32	34	33.4	32	41.9	43.7	32.8	141.0
32mm(1 1/4″)	11.5	11	38	42	42.16	40	51.0	78	35.0	195.3
40mm(1 1/2″)	11.5	11	48	48	48.26	50	60.3	78	56.0	217.4
50mm(2″)	11.5	11	60	60	60.33	63	72.5	78	56.0	217.4
75mm(2 1/2″)	8	11	76	76	73.03	75	90	171.6	73.5	293.4
90mm(3″)	8	11	89	89	88.9	90	76.4	183.8	58.2	252
110mm(4″)	8	11	114	114	114.3	110	115	216	91	360
160mm(6″)	8	11	165	168.3	168.3	160	161	291	120	500

MODEL NO. USU02 Single Spring Check Valve

Single Spring Check Valve, (USU02),ซิงเกิ้ลยูเนียนสปริงเช็ควาล์ว

Union connector: UPVC
Gate: UPVC
Union nut: UPVC
Space seal: EPDM
Spring: Stainless steel
Body: UPVC

ERA, Valve, Spring Check Valve, USU02, สปริงเช็ควาล์ว

Specification of material
NO.	PART	MATERIAL	QTY
1	Union Connector	PVC	1
2	Gate	PVC	1
3	Union nut	PVC	1
4	Space Seal	EPDM, FPM(NBR)	1
5	Spring	STAINLESS STEEL	1
6	Body	PVC	1

Dimensions
Nom	NPT Thd/in	BSPT Thd/in	JIS d1	BS d1	ANSI d1	DIN d1	d	D2	D1	I	L
size	NPT Thd/in	BSPT Thd/in	JIS d1	BS d1	ANSI d1	DIN d1	d	D2	D1	I	L
15mm(1/2″)	14	14	22	22	21-34	20	16	27.5	51.3	20.5	80
20mm(3/4″	14	14	26	26	26.67	25	19	35.5	65.5	22	86.5
25mm(1″)	11.5	11	32	34	33.4	32	24	41.5	73.7	28.0	96
32mm(1 1/4″)	11.5	11	38	42	42.16	40	32	51.6	86.8	30.0	105
40mm(1 1/2″)	11.5	11	48	48	48.26	50	40	60.9	102	34.7	115.5
50mm(2″)	11.5	11	60	60	60.33	63	49.8	75	119.8	40	141

MODEL NO. UBV01 Butterfly Valve

Butterfly Valve (UBV01),บัตเตอร์ฟลายวาล์ว, วาล์ว, ERA

Body: UPVC
Seat seal: EPDM
Gate: UPVC
Stem: SUS410
O-Ring: EPDM
Washer: ABS
Locking Plate: UPVC
Large handle: ABS
Small handle: ABS
Spring: SUS304
Pin: SUS304
Bolt: SUS304
Handle cap: ABS
Inserd bolt: SUS304
Bolt cap: UPVC
Body: UPVC

Specification of material
NO.	PART	MATERIAL	QTY	NO.	PART	MATERIAL	QTY
1	Body	PVC	1	9	Small Handle	ABS	1
2	Seat Seal	EPDM, FPM(NBR)	1	10	Spring	SUS304	1
3	Gate	PVC	1	11	Pin	SUS304	1
4	Stem	SUS410	1	12	Bolt	SUS304	1
5	O-Ring	EPDM, FPM(NBR)	2	13	Handle Cap	ABS	1
6	Washer	ABS	1	14	Inserted Bolt	SUS304	4
7	Locking Plate	PVC	1	15	Bolt cap	PVC	4
8	Large Handle	ABS	1

Dimensions
Nom	D1	DIN D2	JIS D2	ANSI D2	D3	D4	L	H1	H2	W1	W2	DIN n- Øe	JIS n- Øe	ANSI n- Øe
size	D1	DIN D2	JIS D2	ANSI D2	D3	D4	L	H1	H2	W1	W2	DIN n- Øe	JIS n- Øe	ANSI n- Øe
50mm(2″)	160.1	120	100	120.4	55.6	99.7	189.7	223.3	98.3	44	32	4-20	4-19	4-19
65mm(2 1/2″	179.8	141.2	140	139.5	69.7	99.7	189.0	247.0	111.6	48.3	32.4	4-18	4-19	4-19
80mm(3″)	195.0	156.4	140	139.5	83.9	99.7	238.5	282.6	132.5	51.9	36.3	8-20	4-19	4-19
100mm(4″)	228.1	183	150	152.4	103.2	99.7	239.5	319.4	155.4	54.5	44.1	8-20	8-19	8-19
125mm(5″)	257	210.9	175	190.5	129.5	139	309.8	368	170.3	66.5	54.6	8-21.5	8-19	8-19
150mm(6″)	285.4	238.5	240	241.5	151.1	140.0	309.8	400.8	187.5	73.1	56.4	8-24	8-23	8-22
200mm(8″)	342.6	292.4	295	298.5	198.6	140.0	309.8	473.0	230.1	92.0	72.2	8-24	12-23	8-23

Model No. LL 1042(Full Bore)

PRESSURE: MAX 25BAR
TEMPERATURE: – 30°C <=T<=95°C
THREADED: ISO228/1

MODEL NO. UTF01 TS FLANGE

size 1/2″ – 4″
235PSI Maximum Internal Pressure Rating @73 F
Material : PVC

Dimensions
Nom	D1	D2	D3	d1 DIN	d1 ANSI	d1 JIS	d1 BS	I	n- Øe
size	D1	D2	D3	d1 DIN	d1 ANSI	d1 JIS	d1 BS	I	n- Øe
20mm(1/2″)	30	60.5	89	20	21.34	22	22	22	4-16
25mm(3/4″	24	70.5	98	25	26.67	26	26	23.5	4-16
32mm(1″)	42.5	79.5	108	32	33.4	32	34	25.5	4-16
40mm(1-1/4″)	52	89.5	118	40	42.16	38	42	32	4-16
50mm(1-1/2″)	61.5	98.5	127	50	48.26	48	48	32.5	4-19
63mm(2″)	76	120.5	151.5	63	60.33	60	60	36.8	4-19
75mm(2-1/2″)	89.5	139.5	177.3	75	70.03	76	76	41	4-19
90mm(3″)	107.5	152.5	191	90	88.9	89	89	48.5	4-19
110mm(4″)	130.5	190.5	228.5	110	114.3	114	114	58.5	8-19

MODEL No. 101 BALL VALVE

Technical Specification
Body:	CW617N
Ball Seal:	PTFE
Ball:	CW617N
End Connection	CW617N
Stem	CW614N
O-Ring	NBR70sh
Nut	UNI 5771
Handle	Acciaio P10
Temperature Range :	-20°C + 120°C
Working Pressure	From PN 40 to PN 16 Bar WOG 400 – WSP 125

MODEL NO. HD2013 NON ASBESTOS SHEET

Description: Made by special fiber with synthetic oil resistant rubber compound heating and compression molding it.
Application: The product is used as various kinds of equipments, such as artificial oil, distillation pipeline, pipe laying of automobile ad used as flange joins of pipelines.
TEMP: 250°C PRESS: 2.5 MPa

Model No. LL4030 gate valve

PRESSURE: 1.6 MPa
TEMPERATURE: –20°C <= T <=120°C
THREADED: ISO228

Model No. LL5001A spring check valve

PRESSURE: 1.6 MPa
TEMPERATURE: –10°C <= T <= 60°C
THREADED: ISO228

Model No. LL5005 Y strainer

PRESSURE: 1.6 MPa
TEMPERATURE: –10°C <= T <= 80°C
THREADED: ISO228

Model No. LL5007 swing check valve

PRESSURE: 1.6 MPa

Model No. LL5021 foot valve

PRESSURE: 1.6 MPa
TEMPERATURE: –10°C <= T <= 60°C
THREADED: ISO228

Model No. LL1161 ball valve

Pressure : MAX 25 BAR
Temperature : -30°C<= T <= 95°C
Threaded : ISO228/1

Model No. LL1163 ball valve with butterfly handle

Pressure : MAX 25 BAR
Temperature : -30°C <= T <= 95°C
Threaded : ISO228/1

MODEL No. 702 BALL VALVES (Reduced Bore)

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Ball:	CW617N Forged and Hard Chromed
Threads:	ISO 7:2000
Levers:	UNI-EN 1706 Aluminium Epoxy Enamelled Iron Lever Eproxy-painting
Ball Seals	2PTFE
Spindle	Brass CW614 (Blow out Proof)
Spindle Seals	2 O-ring NBR
Temperature Range :	-20°C + 120°C
Working Pressure	From PN 40 to PN 16 Bar WOG 400 – WSP 125

MODEL No. 601 BALL VALVE (Full Bore)

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Ball:	CW617N Forged and Hard Chromed
Threads:	ISO228/1
Levers:	UNI-EN 1706 Aluminium Epoxy Enamelled UNI-EN 10025 Steel, PVC-Coated
Ball Seals	2PTFE
Spindle	Brass CW614N (Blow out Proof)
Spindle Seals	1PTFE + 1 O-Ring NBR
Temperature Range :	-20°C + 120°C
Working Pressure	From PN 40 to PN 16 Bar WOG 400 – WSP 125

MODEL No. 876 ANGLE VALVE

Technical Specification
Body:	Brass CW617N Forged
Threads:	ISO228/1
Handle:	Handle ABS Chrome
Temperature Range :	-20°C + 120°C
Working Pressure	PN10Bar

Tap

Material : ABS
End Connector; BSPT, NPT Thread
Size : 1/2″

Model No. F402 FILTER

Filter inStainless Steel in AISI 304
2-1/2” – 4” with mesh 200 micron
Thread end in Nylon

G	2-1/2″	3″	4″
H	96	106	118
D	83	94	128

This Valve is suitable for industry, pneumatic and hydraulic installations. And ideal for hot/cold water, different oils and compressed air. It can be fitted in horizontal, vertical or oblique position.

Body in hot pressed brass bar
seals in NBR-rubber
Spring in stainless steel AISI 304
Washerholder inNylon
Fliter threaded end : Nylon
Filter mesh in stainless steel AISI 304
1200 micron from 1/2″ up to 2″
Max. working temerature=110°C
Opening pressure = 0.03 bar
Thread end : BSP

bar(max)	16	16	16	10	10	10	8	8	8
G	1/2″	3/4"	1"	1-1/4"	1-1/2"	2"	2-1/2"	3"	4"
L	33	42	47.5	59	67.5	81	103	111	140.5
H	66	72	85.5	95.5	112	140	158	167	192
Weight(g)	80	120	160	230	315	490	1110	1220	1860
BOX(pcs)	36	18	12	8	3	2	-	-	-
CARTON(pcs)	216	108	72	48	36	12	12	8	5

Short pitch precision roller chains(A series) Ansi Roller chain

ANSI Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	T max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*15	4.7625	2.48	2.38	1.62	6.10	6.90	4.30	0.60	1.80	2.0	0.08
*25	6.350	3.30	3.18	2.31	7.90	8.40	6.00	0.80	3.50	4.6	0.15
*35	9.525	5.08	4.77	3.58	12.40	13.17	9.00	1.30	7.90	10.8	0.33
41	12.700	7.77	6.25	3.58	13.75	15.00	9.91	1.30	6.67	12.6	0.41
40	12.700	7.95	7.85	3.96	16.60	17.80	12.00	1.50	14.10	17.5	0.62
50	15.875	10.16	9.40	5.08	20.70	22.20	15.09	2.03	22.20	29.4	1.02
60	19.050	11.91	12.57	5.94	25.90	27.70	18.00	2.42	31.80	41.5	1.50
80	25.400	15.88	15.75	7.92	32.70	35.00	24.00	3.25	56.70	69.4	2.60
100	31.750	19.05	18.90	9.53	40.40	44.70	30.00	4.00	88.50	109.2	3.91
120	38.100	22.23	25.22	11.10	50.30	54.30	35.70	4.80	127.00	156.3	5.62
140	44.450	25.40	25.22	12.70	54.40	59.00	41.00	5.60	172.40	212.0	7.50
160	50.800	28.58	31.55	14.27	64.80	69.60	47.80	6.40	226.80	278.9	10.10
180	57.150	35.71	35.48	17.46	72.80	78.60	53.60	7.20	280.20	341.8	13.45
200	63.500	39.68	37.85	19.85	80.30	87.20	60.00	8.00	353.80	431.6	16.15
240	76.200	47.63	47.35	23.81	95.50	103.00	72.39	9.50	510.30	622.5	23.20
*Bushing chain : d1 in the table indicate the external diameter of the bushing.

Short pitch precision roller chain(B series) BS Roller chain, simplex roller chains

DIN ISO Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	t/T max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
04B-1	6.000	4.00	2.80	1.85	6.80	7.8	5.00	0.60	3.0	3.2	0.11
05B-1	8.000	5.00	3.00	2.31	8.20	8.9	7.10	0.80	5.0	5.9	0.20
*06B-1	9.525	6.35	5.72	3.28	13.15	14.1	8.20	1.30	9.0	10.4	0.41
08B-1	12.700	8.51	7.75	4.45	16.70	18.2	11.80	1.60	18.0	19.4	0.69
10B-1	15.875	10.16	9.65	5.08	19.50	20.9	14.70	1.70	22.4	27.5	0.93
12B-1	19.050	12.07	11.68	5.72	22.50	24.2	16.00	1.85	29.0	32.2	1.15
16B-1	25.400	15.88	17.02	8.28	36.10	37.4	21.00	4.15/3.1	60.0	72.8	2.71
20B-1	31.750	19.05	19.56	10.19	41.30	45.0	26.40	4.5/3.5	95.0	106.7	3.70
24B-1	38.100	25.04	25.40	14.63	53.40	57.8	33.20	6.0/4.8	160.0	178.0	7.10
28B-1	44.450	27.94	30.99	15.90	65.10	69.5	36.70	7.5/6.0	200.0	222.0	8.50
32B-1	50.800	29.21	30.99	17.81	66.00	71.0	42.00	7.0/6.0	250.0	277.5	10.25
40B-1	63.500	39.37	38.10	22.89	82.20	89.2	52.96	8.5/8.0	355.0	394.0	16.35
48B-1	76.200	48.26	45.72	29.24	99.10	107.0	63.80	12/10	560.0	621.6	25.00
*Straight side plates

Solid Pin Chain

Unit : mm

Chain No.	Averarage Tensile Strenght	Pitch	Roller Diameter	Inner Width	Pin Diameter	inner Plate Thickness	Outer Plate Thickness	Plate Height
Chain No.	lbf	P	R	W	D	T1	T2	H
SM220040	22000	10136	47.6	19.0	19.0	5.0	5.0	38.1
SM400060	40000	152.4	66.7	25.4	27.0	8.0	8.0	50.8
SM600060	60000	152.4	66.7	25.4	27.0	9.0	8.0	50.8

MODEL No. 805 FROGED BRASS MINI BALL VALVES F/M

MODEL: 805 FROGED BRASS MINI BALL VALVES F/M

Technical Specification
Body:	CW617N
Ring Nut:	CW617N
Ball:	CW617N
Ball Seat :	PTFE
Stem	CW617N
Ring:	NBR 70 Sh
Handle:	Nylon 6
Screw:	CW617N
Temperature Range :	0°C + 80°C
Working Pressure	PN16 Bar

Stainless Steel Chains

Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	t/T max	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*35SS	9.525	5.08	4.77	3.58	12.4	13.17	9.00	1.30	5.5	6.6	0.33
40SS	12.700	7.95	7.85	3.96	16.6	17.8	12.00	1.50	9.6	10.8	0.63
50SS	15.875	10.16	9.40	5.08	20.7	22.2	15.09	2.03	15.2	17.2	1.03
60SS	19.050	11.91	12.57	5.94	25.9	27.7	18.00	2.42	21.7	26.4	1.51
80SS	25.400	15.88	15.75	7.92	32.7	35.0	24.00	3.25	38.9	46.6	2.62
100SS	31.750	19.05	18.90	9.53	40.4	44.7	30.00	4.00	60.0	70.2	3.94
04BSS	6.000	4.00	2.80	1.85	6.80	7.8	5.00	0.60	2.0	2.4	0.11
05BSS	8.000	5.00	3.00	2.31	8.20	8.9	7.10	0.80	3.5	4.1	0.20
#06BSS	9.525	6.35	5.72	3.28	13.15	14.1	8.20	1.30	6.2	6.8	0.41
08BSS	12.700	8.51	7.75	4.45	16.7	18.2	11.80	1.60	12.0	14.3	0.70
10BSS	15.845	10.16	9.65	5.08	19.5	20.9	14.70	1.70	14.5	17.2	0.94
12BSS	19.050	12.07	11.68	5.72	22.5	24.2	16.00	1.85	18.5	20.9	1.16
16BSS	25.400	15.88	17.02	8.28	36.1	37.4	21.00	4.15/3.1	40.0	47.6	2.73
20BSS	31.750	19.05	19.56	10.19	41.3	45.0	26.40	4.5/3.5	59.0	69.6	3.73
*Brushing chain : d1 in the table indicate the external diameter of the bushing. #Straight side plates

Stainless Steel Roller Chain (SS)

Roller chain made of SUS304 stainless steel (clips are SUS301).

It offers greater corrosion resistance than RS® Roller Chain, NP Roller Chain and WP Roller Chain. It can be used in water, acid, alkaline, and other corrosive environments as well as in a wide range of temperatures (-20°C to +400°C (-4 °F to +752°F)). Although SUS304 stainless steel has almost no magnetic properties, Stainless Steel Roller Chain (SS) is manufactured using cold forming, which causes a weak level of magnetism to exist.

DOUBLE PITCH CONVEYOR CHAINS, small roller type

DIN ISO Chain	ANSI Chain	pitch	Roller Diameter	Width between inner plate	Pin diameter	Pin Length		Inner Plate depth	Plate Thickness	Ultimate tensile strength	Average tensile strength	Weight per meter
		P	d1	b1	d2	L	Lc	h2	T	Q	Q0	q
		mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	kg/m
C208A C208AL	C2040 C2042	25.40	7.95 15.88	7.85	3.96	16.6	17.8	12.0	1.50	14.1	16.7	0.50 0.84
C208AH	C2040H	25.40	7.95	7.85	3.96	18.8	19.9	12.0	2.03	14.1	17.2	0.65
C208B C208BL		25.40	8.51 15.88	7.75	4.45	16.7	18.2	11.8	1.60	18.0	19.4	0.55 0.89
C210A C210AL	C2050 C2052	31.75	10.16 19.05	9.40	5.08	20.7	22.2	15.0	2.03	22.2	28.1	0.78 1.27
C212A C212AL	C2060 C2062	38.10	11.91 22.23	12.57	5.94	25.9	27.7	18.0	2.42	31.8	36.8	1.12 1.61
C212AH C212AHL	C2060H C2062H	38.10	11.91 22.23	12.57	5.94	29.2	31.6	18.0	3.25	31.8	41.6	1.44 2.07
C216A C216AL	C2080 C2082	50.80	15.88 28.58	15.75	7.92	32.7	36.5	24.0	3.25	56.7	65.7	2.08 3.12
C216AH C216AHL	C2080H C2082H	50.80	15.88 28.58	15.75	7.92	36.2	39.4	24.4	4.00	56.7	70.0	2.54 3.58
C220A C220AL	C2100 C2102	63.50	19.05 39.67	18.90	9.53	40.4	44.7	30.0	4.00	88.5	102.6	3.01 4.83
C220AH C220AHL	C2100H C2102H	63.50	19.05 39.67	18.90	9.53	43.6	46.9	30.0	4.80	88.5	112.4	3.56 5.38
C224A C224AL	C2120 C2122	76.20	22.23 44.45	25.22	11.10	50.3	54.3	35.7	4.80	127.0	147.3	4.66 7.66
C224AH C224AHL	C2120H C2122H	76.20	22.23 44.45	25.22	11.10	53.5	57.5	35.7	5.60	127.0	160.9	5.26 8.26
C232A C232AL	C2160 C2162	101.60	28.58 57.15	31.75	14.27	64.8	69.6	47.8	6.40	226.8	278.9	8.23 11.95
C232AH C232AHL	C2160H C2162H	101.60	28.58 57.15	31.75	14.27	68.2	73.0	47.8	7.20	226.8	285.8	9.06 12.77

LEAF CHAINS

BL series

Chain No.	Pitch	Lacing	Plate height	Plate Thickness	Pin Diameter	Plate Length	Minimum Tensile strength	Weight Per Meter
	P		h2 max	T max.	d2 max.	L max
	mm		mm	mm	mm	mm	kN	kg./m
BL422	12.70	2×2	12	2.0	5.08	11.05	21.5	0.64
BL423		2×3				13.16	23	0.79
BL434		3×4				17.4	34.9	1.10
BL444		4×4				19.51	35.5	1.24
BL446		4×6				23.75	46	1.54
BL466		6×6				27.99	47.3	1.84
BL488		8×8				36.45	50.0	2.46
BL522	15.875	2×2	15	2.42	5.94	12.9	31.3	0.94
BL523		2×3				15.37	36.8	1.16
BL534		3×4				20.32	51.5	1.62
BL544		4×4				22.78	59	1.84
BL546		4×6				27.74	73.6	2.30
BL566		6×6				32.18	88.4	2.74
BL588		8×8				42.57	118	3.64
BL622	19.05	2×2	18	3.25	7.92	17.37	55.5	1.46
BL623		2×3				20.73	64.4	1.80
BL634		3×4				27.43	96.2	2.49
BL644		4×4				30.78	103	2.83
BL646		4×6				37.49	119	3.52
BL666		6×6				44.2	154.7	4.21
BL688		8×8				57.61	206.3	5.60
BL822	25.40	2×2	24	4.0	9.53	21.34	76.7	2.80
BL823		2×3				25.48	95.8	3.47
BL834		3×4				33.76	144.7	4.82
BL844		4×4				37.9	153.3	5.43
BL846		4×6				46.18	192.7	6.83
BL866		6×6				54.46	230	8.19
BL888		8×8				71.02	306.7	10.90
BL1022	31.75	2×2	30	4.8	11.1	25.37	106	3.73
BL1023		2×3				30.33	132	4.65
BL1034		3×4				40.23	185	6.46
BL1044		4×4				45.19	212	7.37
BL1046		4×6				55.09	265	9.18
BL1066		6×6				65.0	318	11.00
BL1088		8×8				84.81	424	14.60
BL1222	38.10	2×2	35.7	5.6	12.7	29.62	145.2	5.13
BL1223		2×3				35.43	181	6.37
BL1234		3×4				47.07	254	8.86
BL1244		4×4				52.88	290	10.10
BL1246		4×6				64.52	363	12.60
BL1266		6×6				76.15	435	15.10
BL1288		8×8				99.42	580	20.00

ANSI 25 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
9	18.57	21	6	7	13	15	0.014	* * * * * S35C
10	20.55	23	6	9	14	15	0.018
11	22.54	25	6	10	16	15	0.023
12	24.53	28	6	12	18	15	0.030
13	26.53	30	6	14	20	20	0.048
14	28.54	32	6	14	20	20	0.051
15	30.54	34	6	14	20	20	0.053
16	32.55	36	8	19	25	20	0.077
17	34.56	38	8	19	25	20	0.079
18	36.57	40	8	19	25	20	0.081
19	38.58	42	8	19	25	20	0.084
20	40.59	44	8	19	25	20	0.087
21	42.61	46	8	22	30	20	0.119
22	44.62	48	8	22	30	20	0.121
23	46.63	50	8	22	30	20	0.124
24	48.65	52	8	22	30	20	0.127
25	50.66	54	8	25	35	20	0.165
26	52.68	56	8	30	40	20	0.208
27	54.70	58	8	30	40	20	0.212
28	56.71	60	8	30	40	20	0.216
29	58.73	62	8	35	45	25	0.324
30	60.75	64	8	35	45	25	0.328
31	62.77	66	10	35	45	25	0.328
32	64.78	68	10	40	50	25	0.396
33	66.80	70	10	40	50	25	0.401
34	68.82	72	10	40	50	25	0.405
35	70.84	74	10	40	50	25	0.410
36	72.86	76	10	40	50	25	0.415
37	74.88	78	10	40	50	25	0.421
38	76.90	80	10	40	50	25	0.426
39	78.91	82	10	40	50	25	0.431
40	80.93	84	10	40	50	25	0.437
41	82.95	87	10	40	50	25	0.442
42	84.97	89	10	40	50	25	0.448
43	86.99	91	10	40	50	25	0.454
44	89.01	93	10	40	50	25	0.460
45	91.03	95	10	40	50	25	0.466
46	93.05	97	10	40	50	25	0.473
47	95.07	99	10	40	50	25	0.479
48	97.09	101	10	40	50	25	0.486
50	101.13	105	10	40	50	25	0.500
54	109.21	113	10	40	50	25	0.528
60	121.33	125	10	40	50	30	0.651

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :9T=10.50mm, 10T=12.50mm, 11T=14.50mm, 12T=16.50mm, 13T=18.50mm

ANSI 60 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	49.78	57	10	15.9	37.3	31.8	0.35	* * * * S35C (B TYPE)
9	55.70	63	10	24	43	32	0.40
10	61.65	70	14	30	49	32	0.49
11	67.62	76	14	32	51	32	0.60
12	73.60	83	14	32	51	32	0.69
13	79.60	89	14	35	57	32	0.81
14	85.61	95	16	38	62	32	0.96
15	91.62	101	16	42	68	32	1.10
16	97.65	107	16	45	73	32	1.30
17	103.67	113	16	45	73	32	1.40
18	109.71	119	16	50	83	40	2.00
19	115.74	126	16	50	83	40	2.10
20	121.78	132	16	50	83	40	2.20
21	127.82	138	16	50	83	40	2.30
22	133.86	144	16	50	83	40	2.50
23	139.90	150	16	50	83	40	2.50
24	145.95	156	16	50	83	40	2.60
25	151.99	162	16	50	83	40	2.70
26	158.04	168	16	50	83	40	2.90
27	164.09	174	16	50	83	40	3.00
28	170.14	180	16	50	83	40	3.10
29	176.20	187	16	50	83	40	3.20
30	182.25	193	20	50	83	40	3.40
31	188.30	199	20	50	83	40	3.55	SS41(BW TYPE)
32	194.35	205	20	50	83	40	3.70
33	200.41	211	20	50	83	40	3.85
34	206.46	217	20	50	83	40	4.00
35	212.52	223	20	50	83	40	4.20
36	218.57	229	20	50	83	40	4.40
37	224.63	235	20	50	83	40	4.60
38	230.69	241	20	50	83	40	4.80
39	236.74	247	20	50	83	40	4.95
40	242.80	253	20	50	83	40	5.10
41	248.36	260	20	63	93	45	5.50
42	254.92	260	20	60	93	45	6.00
45	273.09	284	20	60	93	45	6.70
48	291.27	302	20	60	93	45	7.40
50	303.39	314	20	60	93	45	7.90
54	327.63	338	20	60	93	45	8.90
60	363.99	375	20	60	93	45	10.60

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumstance of hub. Groove diameters(dg) are :8T=27.30mm,9T=33.20mm, 10T=39.50mm, 11T=45.80mm
2. B-type solid sprockets over 35 teeth made by S35C are available.

BS06B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	24.88	28.0	8	10	19	19	0.02	* * * * * * S35C (B TYPE)
9	27.84	31.0	8	11	22	20	0.06
10	30.84	34.0	8	12	25	20	0.08
11	33.81	37.0	8	14	27	20	0.09
12	36.80	40.0	9	16	31	20	0.12
13	39.80	43.0	9	18	32	20	0.12
14	42.81	46.3	9	16	32	20	0.12
15	45.81	49.3	9	22	35	20	0.16
16	48.82	52.3	9	23	37	20	0.19
17	51.84	55.3	11	25	41	20	0.22
18	54.85	58.3	11	28	44	20	0.25
19	57.87	61.3	11	29	47	20	0.28
20	60.89	64.3	11	32	50	20	0.32
21	63.91	68.0	11	32	53	20	0.36
22	66.93	71.0	11	32	53	20	0.37
23	69.95	73.5	11	32	53	20	0.38
24	72.97	77.0	11	32	53	22	0.43
25	76.00	80.0	11	32	53	22	0.44
26	79.02	83.0	11	32	53	22	0.45
27	82.05	86.0	11	32	53	22	0.46
28	85.07	89.0	11	32	53	22	0.48
29	88.10	92.0	11	32	53	22	0.49
30	91.12	94.7	11	32	53	22	0.51	S35C (B TYPE)
31	94.15	98.3	11	32	53	22	0.52
32	97.18	101.3	11	32	53	22	0.54
33	100.20	104.3	11	32	53	22	0.56
34	103.23	107.3	11	32	53	22	0.57
35	106.26	110.4	11	32	53	22	0.59
36	109.29	113.4	11	32	53	22	0.61
37	112.31	116.4	11	32	63	22	0.77
38	115.34	119.5	11	32	63	25	0.82
39	118.37	122.5	11	32	63	25	0.83
40	121.40	125.5	11	32	63	25	0.85
41	124.43	128.5	11	40	63	25	0.85	SS41 (BW TYPE
42	127.46	131.6	15	40	63	25	0.92
43	130.48	134.6	15	40	63	25	0.92
44	133.53	137.6	15	40	63	25	0.92
45	136.55	140.7	15	40	63	25	0.95
46
48	145.64	149.7	15	40	63	25	1.00
50	151.69	155.7	15	40	63	25	1.05
52
54	163.80	167.8	15	40	63	25	1.20
60	181.99	186.0	15	40	63	25	1.30

Note:
1.Sprocket marked with an asterisk (*) has a groove at the extternal circumference of hub. Groove diameter(Dg) are:8T =14.00mm, 9T=16.00mm,10T=18.00, 11T =22.00mm, 12T=24.00mm, 13T=28.00mm
2. B-type solid sprockets over 40 teeth made by S35C are availiable

ANSI 80 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	66.37	76	11	25.4	44.5	41.3	0.7	* * S35C (B TYPE)
9	74.27	85	11	35	58	40	0.8
10	82.19	93	17	32	52	40	0.9
11	90.16	102	17	38	60	40	1.2
12	98.14	110	17	42	67	40	1.5
13	106.14	118	17	48	77	40	1.9
14	114.15	127	17	48	77	40	2.0
15	122.17	135	20	60	93	40	2.6
16	130.20	143	20	60	93	40	2.8
17	138.23	151	20	60	93	40	3.0
18	146.27	159	20	60	93	40	3.2
19	154.32	167	20	60	93	40	3.4
20	162.37	176	20	60	93	40	3.6
21	170.42	184	20	65	93	40	3.8
22	178.48	192	20	65	107	45	4.8	SS41(BW TYPE)
23	186.54	200	20	65	107	45	5.1
24	194.60	208	20	65	107	45	5.4
25	202.66	216	20	65	107	45	5.6
26	210.72	224	20	65	107	45	5.9
27	218.79	233	20	65	107	45	6.1
28	226.86	241	20	65	107	45	6.5
29	234.93	249	20	65	107	45	6.8
30	243.00	257	20	65	107	45	7.1
31	251.07	265	20	65	107	45	7.5
32	259.14	273	20	65	107	45	7.8
33	267.21	281	20	65	107	45	8.2
34	275.29	289	20	65	107	45	8.5
35	283.36	297	20	65	107	45	8.9
36	291.43	306	20	70	117	50	10.1
37	299.51	314	20	80	117	50	10.5
38	307.58	322	20	70	117	50	10.9
40	323.74	338	20	70	117	50	11.8
41	331.81	346	20	80	117	50	12.5
42	339.89	354	20	70	117	50	12.7
43	347.47	362	20	80	117	50	13.2
44	356.04	370	20	80	117	50	13.8
45	364.12	378	20	70	117	50	14.2
46	372.20	387	20	80	117	50	15.1
47	380.20	395	20	80	117	50	15.4
48	388.36	403	20	70	117	50	15.8
49	396.44	411	20	80	117	50	17.0
50	404.52	419	20	70	117	50	17.6
54	436.84	451	20	70	117	50	19.2
60	485.33	500	20	70	117	50	23.1

Dimension : mm

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(Dg) are :8T=36.50mm,9T=44.60mm
2. B-type solid sprockets over 21 teeth made by S35C are available.

BS12B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	49.78	57.6	10	15.9	37.3	31.8	0.35	* * * * S35C (B TYPE)
9	55.70	62.0	10	24	43	32	0.40
10	61.65	69.0	14	30	49	32	0.49
11	67.62	75.0	14	32	51	32	0.60
12	73.60	81.50	14	32	51	32	0.69
13	79.60	87.5	14	35	57	32	0.81
14	85.61	93.6	16	38	62	32	0.96
15	91.62	99.8	16	42	68	32	1.10
16	97.65	105.5	16	45	73	32	1.30
17	103.67	115.5	16	45	73	32	1.40
18	109.71	118.0	16	50	83	40	2.00
19	115.74	124.2	16	50	83	40	2.10
20	121.78	129.7	16	50	83	40	2.20
21	127.82	136.0	16	50	83	40	2.30
22	133.86	141.8	16	50	83	40	2.50
23	139.90	149.0	16	50	83	40	2.50
24	145.95	153.9	16	50	83	40	2.60
25	151.99	160.0	16	50	83	40	2.70
26	158.04	165.9	16	50	83	40	2.90
27	164.09	172.3	16	50	83	40	3.00
28	170.14	178.0	16	50	83	40	3.10	S35C (B TYPE)
29	176.20	184.1	16	50	83	40	3.20
30	182.25	190.5	20	50	83	40	3.40
31	188.30	196.3	20	50	83	40	3.55	SS41(BW TYPE)
32	194.35	203.3	20	50	83	40	3.70
33	200.41	209.3	20	50	83	40	3.85
34	206.46	214.6	20	50	83	40	4.00
35	212.52	221.0	20	50	83	40	4.20
36	218.57	226.8	20	50	83	40	4.40
37	224.63	232.9	20	50	83	40	4.60
38	230.69	239.0	20	50	83	40	4.80
39	236.74	245.1	20	50	83	40	4.95
40	242.80	251.3	20	50	83	40	5.10
41	248.36	257.3	20	60	93	45	5.50
42	254.92	264.5	20	60	93	45	6.00
45	273.09	282.5	20	60	93	45	6.70
48	291.27	300.1	20	60	93	45	7.40
50	303.39	312.3	20	60	93	45	7.90
54	327.63	336.6	20	60	93	45	8.90
60	363.99	373.0	20	60	93	45	10.60

Note: 1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =27.00mm, 9T=32.00mm,10T=37.00, 11T =45.00mm 2. B-type solid sprockets over 30 teeth made by S35C are availiable

ANSI 100 STANDARD SPROCKET

sumo, sprocket, ansi100, ANSI STANDARD SPROCKET, เฟืองโซ่

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
10	102.47	116	20	40	78	56	1.90	S35C (B TYPE)
11	112.70	127	20	50	91	56	2.30
12	122.67	138	20	55	98	56	2.90
13	132.67	148	20	55	98	56	3.10
14	142.68	158	20	55	107	56	3.60
15	152.71	168	20	60	117	63	4.20
16	162.74	179	20	60	117	63	4.60
17	127.79	189	20	65	117	63	5.30
18	182.84	199	20	65	117	63	5.70
19	192.90	209	20	65	117	63	6.10
20	202.96	220	20	65	127	63	6.50
21	213.02	230	20	65	127	63	7.00
22	223.10	240	20	70	127	63	7.90	SS41(BW TYPE
23	233.17	250	20	70	127	63	8.30
24	243.25	260	20	70	127	63	8.80
25	253.32	270	20	70	127	63	9.30
26	263.40	281	20	70	127	63	9.70
27	273.49	291	20	70	127	63	10.30
28	283.57	301	20	70	137	71	10.90
29	293.66	311	20	70	137	71	11.60
30	303.75	321	20	70	137	71	12.10
31	313.83	331	20	70	137	71	12.90	S35C (B TYPE) SS41(BW TYPE
32	323.92	341	20	70	137	41	13.40
33	334.01	352	20	70	137	71	14.50
34	344.11	362	20	80	137	71	16.40
35	354.20	372	20	80	137	71	17.00
36	364.29	382	20	80	137	71	17.80
37	374.38	392	20	80	137	71	18.50
38	384.48	402	20	80	137	71	19.00
39	394.57	412	20	80	137	71	19.50
40	404.67	422	20	80	147	80	20.50
41	414.77	433	20	80	147	80	21.50
42	424.86	443	20	80	147	80	22.50
43	434.96	453	20	80	147	80	23.50
44	445.06	463	20	80	147	80	24.00
45	455.16	473	20	80	147	80	25.00
48	485.45	503	20	80	147	100	29.00
50	505.65	524	20	80	147	100	30.00
54	546.05	564	20	90	147	100	37.40
55	556.15	574	20	90	147	100	38.40
60	606.67	625	20	90	147	100	45.40

Note:
1. B-type solid sprockets over 21 teeth made by S35c are availiable.

ANSI 120 STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
10	123.29	140	25	50	78	56	3.20	S35C (B TYPE)
11	135.24	158	25	55	91	56	4.00
12	147.21	165	25	60	98	56	4.80
13	159.20	177	25	60	98	56	5.30
14	171.22	190	25	65	107	56	6.30
15	183.25	202	25	70	117	63	7.80
16	195.29	214	25	70	117	63	8.40
17	207.35	227	25	70	117	63	9.10
18	219.41	239	25	70	117	63	9.90
19	231.48	251	25	70	117	63	10.70
20	243.55	263	25	80	127	63	12.10
21	255.63	276	25	80	127	63	13.00
22	267.72	288	30	80	127	63	13.40	SS41(BW TYPE)
23	279.80	300	30	80	127	63	14.20
24	291.90	312	30	80	127	63	15.20
25	303.99	324	30	80	127	63	16.20
26	316.09	337	30	80	127	63	17.20
27	328.19	349	30	80	127	63	19.20
28	340.29	361	30	85	137	71	20.90
29	352.39	373	30	85	137	71	21.00
30	364.50	385	30	85	137	71	23.20
31	376.60	398	30	85	137	71	24.10
32	388.71	410	30	85	137	41	25.70
33	400.82	422	30	85	137	71	26.80
34	412.93	434	30	85	137	71	28.20
35	425.04	446	30	85	137	71	29.70
36	437.15	458	30	85	137	71	30.00
37	449.26	470	30	85	137	71
38	461.38	483	30	85	137	71	31.40
39	473.49	495	30	85	137	71
40	485.60	507	30	90	147	80	38.20
41	497.72	519	30	90	147	80
42	509.84	531	30	90	147	80	42.00
43	521.95	543	30	90	147	80
45	546.19	568	30	90	147	80	47.60
48	582.54	604	30	60	147	80	53.00
50	606.78	628	30	90	147	100	53.80
54	655.26	677	30	90	147	100	54.70
55	667.38	689	30	90	147	100
56	679.50	701	30	90	147	100
57	691.63	713	30	90	147	100
58	703.75	726	30	90	147	100
60	727.99	750	30	90	147	100	67.80

Note:
1. B-type solid sprockets over 21 teeth made by S35c are availiable

BS16B STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	Btype/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	66.37	77.0	11	25	44.5	41.3	0.7	S35C (B TYPE)
9	74.27	85.0	11	35	58	40	0.8
10	82.19	93.0	17	32	52	40	0.9
11	90.16	99.5	17	38	60	40	1.2
12	98.14	109.0	17	42	67	40	1.5
13	106.14	117.0	17	48	77	40	1.9
14	114.15	125.0	17	48	77	40	2.0
15	122.17	133.0	20	60	93	40	2.6
16	130.20	141.0	20	60	93	40	2.8
17	138.23	149.0	20	60	93	40	3.0
18	146.27	157.0	20	60	93	40	3.2
19	154.32	165.2	20	60	93	40	3.4
20	162.37	173.2	20	60	93	40	3.6
21	170.42	181.2	20	60	93	40	3.8
22	178.48	189.3	20	65	107	45	4.8	SS41 (BW TYPE)
23	186.54	197.5	20	65	107	45	5.1
24	194.60	205.5	20	65	107	45	5.4
25	202.66	213.5	20	65	107	45	5.6
26	210.72	221.6	20	65	107	45	5.9
27	218.79	229.6	20	65	107	45	6.1
28	226.86	237.7	20	65	107	45	6.5
29	234.93	245.8	20	65	107	45	6.8
30	243.00	254.0	20	65	107	45	7.1
31	251.07	262.0	20	65	107	45	7.5
32	259.14	270.0	20	65	107	45	7.8
33	267.21	278.5	20	65	107	45	8.2
34	275.29	287.0	20	65	107	45	8.5
35	283.36	296.2	20	65	107	45	8.9
36	291.43	304.6	20	70	117	50	10.1
37	299.51	312.6	20	80	117	50	10.5
38	307.58	320.7	20	70	117	50	10.9
40	323.74	336.9	20	70	117	50	11.8
41	331.81	345.0	20	80	117	50	12.5
42	339.89	353.0	20	70	117	50	12.7
43	347.97	361.1	20	80	117	50	13.2
44	356.04	369.1	20	80	117	50	13.8
45	354.12	377.1	20	70	117	50	14.2
46	372.20	385.2	20	80	117	50	15.1
47	380.28	393.2	20	80	117	50	15.1
48	388.36	401.3	20	70	117	50	15.8
49	396.44	409.3	20	80	117	50	17.0
50	404.52	417.4	20	70	117	50	17.6
54	436.84	448.3	20	70	117	50	19.2
60	485.33	498.3	20	70	117	50	23.1

Note:
1. Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:
8T =36.00mm, 9T=44.00mm
2. B-type solid sprockets over 21 teeth made by S35C are availiable

sumo coupling

Coupling No.	Max Dia.	Coupling(mm)					Casting(mm)
Coupling No.	Max Dia.	E	L	F	I	Approx. Wt(kg).	A	B	Approx. Wt(kg).
KC-3012	16	45	65	27.2	29.5	0.31	69	63	0.22
KC-4012	22	62	78.4	36	36	0.73	77	72	0.30
KC-4014	28	69	79.4	45	36	1.12	84	75	0.31
KC-4016	32	77	86.4	51.5	40	1.50	92	75	0.35
KC-5014	35	86	99.7	56	45	2.15	101	85	0.47
KC-5016	40	96	99.7	64	45	2.75	112	85	0.50
KC-5018	45	106	98.2	73.5	45	3.60	122	85	0.60
KC-6018	56	127	123.5	89.5	56	6.55	142	107	1.2
KC-6020	60	139	123.5	102.5	56	8.38	158	105	1.2
KC-6022	71	151	123.5	115	56	10.4	168	117	1.2
KC-8018	80	169	141.2	115	63	13.2	190	129	1.9
KC-8020	90	185	145.2	125	65	16.2	210	137	2.5
KC-8022	100	202	157.2	142	71	21.8	226	137	2.7
KC-10020	110	233	178.8	162	80	32.4	281	153	4.1
KC-12018	125	256	202.7	173	90	43.2	307	181	5.2
KC-12022	140	304	222.7	213	100	69.1	357	181	6.7

MODEL No. 701 REDUCED BORE

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Ball:	CW617N Forged and Hard Chromed
Threads:	ISO 7:2000
Levers:	UNI-EN 1706 Aluminium Epoxy Enamelled Iron Lever Eproxy-painting
Ball Seals	2PTFE
Spindle	Brass CW614 (Blow out Proof)
Spindle Seals	2 O-ring NBR
Temperature Range :	-20°C + 120°C
Working Pressure	From PN 40 to PN 16 Bar WOG 400 – WSP 125

MODEL No. 800 FROGED BRASS MINI BALL VALVES F/F

MODEL:800 FROGED BRASS MINI BALL VALVES F/F

Technical Specification
Body:	OT.58 UNI 5705 -65
Ring Nut:	OT.58 UNI 5705 -65
Ball:	OT.58 UNI 5705 -65
Ball Seat:	PTFE
Ring:	NBR
Stem	OT.58 UNI 5705 -65
Handle:	Nylon 6
Screw	UNI 5771
Temperature Range :	0°C + 80°C
Working Pressure	PN16 Bar

ABA 12 MM ORIGINAL ALUZINK AND STAINLESS

ABA Original clamps feature an extra strong one-piece pressed housing, rolled-up band edges and a smooth band underside that protects the hose. For added corrosion resistance the band in the ABA 12 mm Standard is made of Aluzink which gives three times the protection offered by conventional galvanized steel.

ABA Original – the trouble-free clamp with high tightening force and high breaking torque.

ABA Original Standard:

Screw: Electro zinc plated.
Band: Aluzink.
Housing: Painted.
ABA Original Stainless: All parts in SS 2333/AISI 304 Stainless Steel.

Hose size	Supplied Ø	Minimum Ø	Standdard T	Stainless T	Rec.tightening torque Nm
15-24	25	15	0.8	0.8	4-5
19-28	29	19
22-32	33	22
26-38	39	26
32-44	45	32	1.0		5-6
38-50	51	38
44-56	57	44
50-65	66	50
58-75	76	58
68-85	86	68
77-95	96	77
87-112	113	87
106-138	139	106
132-165	166	132
150-180	181	150
175-205	206	175
200-231	232	200
226-256	257	226
251-282	283	251
277-307	308	277

Larger size available

ABA MINI STANDARD

ABA Mini features rolled-up band edges that are gentle on hoses. The band tongue that fits under the hose is profiled for added strength. The nut is retained even if the screw is removed. Furthermore the screw has a hexagonal head and can be tightened with an ABA flexible socket wrench. The ABA Mini is particularly suitable for use on small, thin-walled hoses.

ABA Mini Standard S10: Electro zinc plated.

Size	Del Ø	Min Ø	Rec.tightening torque Nm
Mini 7	7.5	6.5	1.5
Mini 8	8.5	7
Mini 9	9.5	8
Mini10	10.5	9
Mini 11	11.5	9.5
Mini 12	12.5	10.5
Mini 13	13.5	11.5
Mini 14	14.5	12.5
Mini 15	15.5	13.5
Mini 16	16.5	14
Mini 17	17.5	15

ABA Nova 9 mm Aluzink and Stainless

The highly general ABA Nova clamp is the ideal choice for smaller dimensions of hoses. The worm gear housing is manufactured in a closely monitored automatic resistance welding process. The base of the housing is cut back and the internal tolerances are very close: a few hundredths of a millimeter. It is available for a wide range of hose dimensions and retains its roundness and sealing qualities even on the smallest of hoses.

ABA Nova Standard: Screw: Electro zinc plated. Band: Aluzink.
Housing: Painted.
ABA Nova Stainless: All parts are made of SS 2333/AISI 304 stainless steel.

Standard
Hose size	Supplied Ø	Minimum Ø	Rec.tightening
8-14	15	8	2.5-3.5
11-17	17	10	2.5-3.5
13-20	22	12	3-4
15-24	25	15
19-28	28	16
22-32	32	20
26-38	40	25	4-4.5
32-44	45	30
38-50	51	32
44-56	56	44
50-56	65	50
58-75	75	58
68-85	85	68
Stainless
Hose size	Supplied Ø	Minimum Ø	Rec.tightening
8-14	15	8	2.5-3.5
11-17	17	10	2.5-3.5
13-20	22	12	3-4
15-24	25	15
19-28	28	16
22-32	32	20
26-38	40	25	4-4.5

ABA BANDING SYSTEM

An instant solution for clumping. The ABA Banding System offers you the immediate possibility to make your own clamps from the components. Ideal for service & maintenance. Each system is supplied in a dispenser box containing a full length of band and a number of the unique quick-lock housing with screw. The band is perforated, flexible and in stainless steel, Available in 9 or 12 mm band widths.

ABA banding System/W2B: Screw and housing: Electro zinc and yellow chromated.
Band AISI 430

Band width	Description
9mm	KIT 3 meters with 8 quick-lock housings
12mm	KIT 3 meters with 6 quick-lock housings

9mm	KIT 5 meters with 8 quick-lock housings
12mm	KIT 5meters with 6 quick-lock housings

9mm	Bandbox contaning 25 meters
12mm	Bandbox contaning 25 meters

9mm	Quick-lock housing box 100pcs
12mm	Quick-lock housing box 100pcs

MODEL No. 7010 Valflon Gasket

These gaskets are stamped out from a pure PTFE sheet. As they are susceptible to cold-flow they should generally be used on grooved flangs

VALQUA PRODUCT No.	Temperature	Pressure MPa{kgf/cm^2}
7010	-50~100	0.49{5}

ABA FLEXIDRIVER 60CM – ABA FLEXIDRIVER 25CM

MODEL No. 7020 Valflon Gasket

The shortcoming PTFE is its susceptiblelity to cold-flow(creep). In this type of gasket, the cold-flow property has been improved with the admixture of an organic filter and the use of a special manufacturing technique. These gaskets combine an excellent heat- and chemical-resistance with a high cold-flow resistance and are ideal for use in pipelines handling all types of chemical products(such as highly concentrated hot sulfuric and nitric acids). They cannot be used for sodium hydroxide and other highly concentrated alkalis and hydrofluoric acid.

VALQUA PRODUCT No.	Temperature	Pressure MPa{kgf/cm^2}
7020	-200~200	3.92{40}

Stainless Steel – GBS Heavy Duty Clamp

BAND STAINLESS STEEL 430
CLAMPING HEAD: STEEL, ZINC PLATED

Band Width (mm)	Recommended tightening torque	Clamping Range (mm)
18	8 Nm	17-19
18	8 Nm	19-21
18	8 Nm	21-23
18	8 Nm	23-25
18	8 Nm	25-27
18	8 Nm	27-29
18	8 Nm	29-31
18	8 Nm	31-34
18	8 Nm	34-37
18	8 Nm	37-40
18	8 Nm	40-43
20	10 Nm	43-47
20	10 Nm	47-51
20	10 Nm	51-55
20	10 Nm	55-59
20	10 Nm	59-63
20	10 Nm	63-68
25	20 Nm	68-73

Band Width (mm)	Recommended tightening torque	size
25	20 Nm	73-79
25	20 Nm	79-85
25	20 Nm	85-91
25	20 Nm	91-97
25	20 Nm	97-104
25	20 Nm	104-112
25	20 Nm	112-121
25	20 Nm	121-130
30	25 Nm	130-140
30	25 Nm	140-150
30	25 Nm	150-162
30	25 Nm	162-174
30	25 Nm	174-187
30	25 Nm	187-200
30	25 Nm	200-213
30	25 Nm	213-226
30	25 Nm	226-239
30	25 Nm	239-252

MODEL No. 7030 Valflon Jacket Gasket

These wrapped gaskets use a NON-AS joint sheet instead of the conventional asbestos joint sheet as the center core.

Accordingto the structure of the center core, these gasket are classified into an N and S type. The N type gaskets are designed for general application. In contrast, the S type gaskets have a more sophisticated core structure to suppress the flow characteristics that are the particular feature of PTFE jackets. They are therefore suited for high-temperature and high-pressure application. VALFLON jacket Gaskets are available with three different jacket shapes.

Usable Range
VALQUA PRODUCT No.	Temperature	Pressure MPa{kgf/cm^2}
7030	-100~150	1.47{15}

Standard Dimensions
VALQUA PRODUCT No.	(m)	(y)N/mn²{kgf/mm^2}
7030	1.6`3.8	14.71{1.5}

ABA Robust Standard

ABA Robust is a heavy-duty clamp with rolled-up band edges. It is used in many applications such as for sealing heavy-gauge reinforced hoses used for irrigation, drainage, sludge pumping etc. The hexagonal head design allows tightening with an ordinary spanner or socket wrench. This product has the original heavy duty design with preshaped welding points. ABA Robust comes with three (3) welding points for increased security for large sizes. Please note that over 40 mm diameter ABA only use M8 bolts or larger for safe installations.

ABA Robust Standard : All parts are made of high grade carbon steel and are individually electro zinc plated before assembly.

Ømm	A	T	Bolt
17-19	18	0.6	M5x35
20-22	18	0.6	M5x35
23-25	20	0.8	M6x45
26-28
29-31
32-35
36-39			M6x50
40-43			M6x50
44-47	23	1.2	M8x60
48-51			M8x60
52-55			M8x70
56-59
60-63
64-67
68-73
74-79
80-85
86-91
92-97
98-103
104-112
113-121
122-130			M8x80
131-139
140-148
149-161
162-174
175-187	30	1.7	M10x90
188-200			M10x90
201-213			M10x100
214-226
227-239
240-252

Hose Clamp – TORRO

W1 : ALL PARTS :STEEL, ZINCE PLATED
W1 : ALL PARTS :STAINLESS STEEL 304

Band Width (mm)	Recommended tightening torque	size	Material
9	2.5 – 3.0(Nm)	8-12	W1
9	2.0 – 2.5(Nm)	8-16	W4
9	3.0 – 3.5(Nm)	10-16	W1
9	3.0 – 3.5(Nm)	12-18	W1
9	3.0 – 3.5(Nm)	12-22	W4
12	5.0 – 5.5(Nm)	16-27	W1,W4
12	5.0 – 5.5(Nm)	20-32	W1,W4
12	5.0 – 5.5(Nm)	25-40	W1,W4
12	5.0 – 5.5(Nm)	30-45	W1,W4
12	5.0 – 5.5(Nm)	35-40	W1,W4
12	5.0 – 5.5(Nm)	40-60	W1,W4
12	5.0 – 5.5(Nm)	50-70	W1,W4
12	5.0 – 5.5(Nm)	60-80	W1,W4
12	5.0 – 5.5(Nm)	70-90	W1,W4
12	5.0 – 5.5(Nm)	80-100	W1,W4
12	5.0 – 5.5(Nm)	90-110	W1,W4

Band Width (mm)	Recommended tightening torque	size	Material
12	5.0 – 5.5(Nm)	100-120	W1,W4
12	5.0 – 5.5(Nm)	110-130	W1,W4
12	5.0 – 5.5(Nm)	120-140	W1,W4
12	5.0 – 5.5(Nm)	130-150	W1,W4
12	5.0 – 5.5(Nm)	140-160	W1,W4
12	5.0 – 5.5(Nm)	150-170	W1,W4
12	5.0 – 5.5(Nm)	160-180	W1,W4
12	5.0 – 5.5(Nm)	170-190	W1,W4
12	5.0 – 5.5(Nm)	180-200	W1,W4
12	5.0 – 5.5(Nm)	190-210	W1,W4
12	5.0 – 5.5(Nm)	200-220	W1,W4
12	5.0 – 5.5(Nm)	210-230	W1,W4
12	5.0 – 5.5(Nm)	230-250	W1,W4
12	5.0 – 5.5(Nm)	260-280	W1,W4
12	5.0 – 5.5(Nm)	280-300	W1,W4

NORMACONNECT^® Pipe Couplings

The Fast & Economical way of joining Plain Ended Piping

NORMACONNECT^®Pipe Couplings require no special tools or pipe-end treatment. Flexible, Lightweight, 304 or 316 Stainless Steel construction; The NORMACONNECT^® Pipe Coupling design allows for pipe-misalignment, will give a reliable seal, allows for 2° angular deflection, vibration or a small gap between pipe ends. The Norma Pipe Couplings are manufactured in Germany and are used in Shipbuilding, Wastewater Treatment, Compressed Air, General Industry and Construction.

New installations, system alterations or repairs, NORMACONNECT^® will replace the use of welded, flanged, threaded or grooved type pipe joints.

NORMACONNECT^® Pipe Couplings are the easiest and most cost effective way to join plain ended pipes. Available in diameters from 26.9 to 2032mm. For system working pressures up to 70* bar. (*Maximum allowable working pressure rating varies according to pipe diameter)

Axial Restraint Metal Pipes

Non Restraint All Pipes

Axial Restraint Plastic Pipes

Repair Non Restraint All Pipes

ASSEMBLY TOLERANCES

Up to 35mm Distance between Pipe Ends with Insert

Up to 3mm Axial Misalignment

2° Angular Deflection in all directions

Up to 60mm Pipeovality

Up to 6mm Outer diameter pipe difference

Axial Restraint NORMACONNECT^® GRIP TYPE Pipe Coupling

OD(mm)	Shipping Working Pressure (bar)	Industrial Working Pressure (bar) P max²	Part Number W4 NBR
26.9	16	70	0578 8500 026
28.0	16	70	0578 8500 028
30.0	16	70	0578 8500 030
33.7	16	60	0578 8500 033
35.0	16	60	0578 8500 035
38.0	16	60	0578 8500 038
42.4	16	50	0578 8500 042
44.5	16	50	0578 8500 044
48.3	16	50	0578 8500 048
54.0	16	60	0578 8500 054
57.0	16	50	0578 8500 057
60.3	16	40	0578 8500 060
73.0	16	40	0578 8500 073
76.1	16	35	0578 8500 076
84.0	16	35	0578 8500 084
88.9	16	35	0578 8500 088
101.6	16	35	0578 8500 101
104.0	16	35	0578 8500 104
108.0	16	35	0578 8500 108
114.3	16	35	0578 8500 114
129.0	16	30	0578 8500 129
141.6	16	30	0578 8500 141
154.0	16	25	0578 8500 154
168.3	16	25	0578 8500 168
219.1	16	25	0578 8500 219

Single Sphere

S/NO	PART NAME	MATERIAL
1	Body(Outer Layer)	EPDM Rubber
2	Body(Outer Layer)	EPDM Rubber
3	Reinforcing Fabric	Nylon Fabric
4	Wire	Hard Steel Wire
5	Flange	Ductile Iron With Epoxy Coated

Normal Pipe size (DN)	INCH MM	1.1/2 40	2 50	2.1/2 65	3 80	4 100	5 125	6 150	8 200	10 250	12 300
Natural Length(L)	MM	95	105	115	130	135	170	180	205	240	260
Axial Compression	MM	8	8	12	12	18	18	18	25	25	25
Axial Elongation	MM	4	4	6	6	10	10	10	14	14	14
Lateral Deflection	MM	8	8	10	10	12	12	12	22	22	22
Angular Deflextion	DEG	15	15	15	15	15	15	15	15	15	15

Operating Temperatures	AMBIENT	50	60	70	80
Maximum Operating Pressure(bar)	16	12.4	10	7.5	6.5
OPERATING PRESSURE:16 BAR OPERATING TEMPERATURE: -10 to 80Deg C VACUUM RATING: 700 MM/HG BURST PRESSURE :48 BAR

Double Sphere

S/NO	PART NAME	MATERIAL
1	Body(Outer Layer)	EPDM Rubber
2	Body(Outer Layer)	EPDM Rubber
3	Reinforcing Fabric	Nylon Fabric
4	Wire	Hard Steel Wire
5	Flange	Ductile Iron With Epoxy Coated

Normal Pipe size (DN)	INCH MM	1.1/2 40	2 50	2.1/2 65	3 80	4 100	5 125	6 150	8 200	10 250	12 300
Natural Length(L)	MM	175	175	175	175	225	225	225	325	325	325
Axial Compression	MM	25	25	25	25	30	30	30	40	40	40
Axial Elongation	MM	15	15	15	15	20	20	20	25	25	25
Lateral Deflection	MM	20	20	20	20	25	25	25	30	30	30
Angular Deflextion	DEG	30	30	30	30	30	30	30	30	30	30

Operating Temperatures	AMBIENT	50	60	70	80
Maximum Operating Pressure(bar)	16	12.4	10	7.5	6.5
OPERATING PRESSURE:16 BAR OPERATING TEMPERATURE: -10 to 80Deg C VACUUM RATING: 650 MM/HG BURST PRESSURE :48 BAR

MODEL No. 7GS64N Code Seal(soft)

The rope-shaped products have a round (rope-shaped) cross-section and are not provided with an adheresive.

Nominal Dimension(thickess. mm)	Length m
2	40
4	20
6	10
8	7
10	5
12	5

MODEL No. 8132 GLAND PACKING (for low and middle speed)

This coil packing is manufactured by treating a mixed yarn of aramide and manmade inorganic fibers with a PTFE dispersion with subsequent plaiting to an angular cross-section and finishing a PTFE dispersion ans a lubricant oil.

It excels to flexibility and snug-fit to the axis is good.
Since the color tone is white, designed for uses which are hostile black.
It is best for the Non-asbestos products substitute of No.7132
Suitable as a shift seals in pumps for fluids such as water, oil-based fluids, weak alkalis fluids
It is possible to use it as a mixer that dislikes contamination and a shaft seal material of the rotary machines such as agitators, and an shaft seal material of the rotary machines such as agitators.

MODEL No. 8133 GLAND PACKING (for universal valves)

This coil packing is manufactured by treating a mixed yarn of aramide and manmade inorganic fibers with an inorganic filter with subsequent plaiting to an angular cross-section and finishing with a PTFE dispersion.

VALQUA NO.8133 GLAND PACKING (for universal valves)

This white “clean” packing does not use lubricant oil.
Suitable as a seal for universal valves handing water and oil based fluids.

MODEL No. 8137 GLAND PACKING (for diverse applications)

VALQUA NO.8137 GLAND PACKING (for diverse applications)

This white” clean” packing does not use lubricant oil.
Superior cost performance.
Can be used for a large diversity of applications, including shaft seal of universal pumps, stirrers and plunger pumps

MODEL No. 8201 GLAND PACKING (for pumps, rotary and reciprocating machines)

This coil packing is manufactured by treating aramide fiber strands with a PTFE dispersion and a lubricant oil with subsequent plaiting to an angular cross-section.

Featuring the benefits of superior wear resistance and an unprecedented endurance, this packing is the closet thing to a maintenance-free seal achieved so far.
Outstanding performance characteristics as a rotary shaft seal for slurries and high-viscosity fluids.

MODEL NO. BF#350 size1270x1270mm BUTTERFLY compressed asbestos rubber sheet

butterfly, ปะเก็นแผ่น, ปะเก็นเชือก, Asbestos

MAIN MATERIAL: Asbestos fi ber and nature rubber.
PROCESSING: Heat-Compressing in moulds
APPLICATION: Suitable for seal gasket materials for equipments, pipeline, fl anges with solvent.
TEMPERATURE: 350°C
PRESSURE: 4.0Mpa
COLOR : BLACK, RED

MODEL No. 6500 Non-AS Joint Sheet

Suitable as a non-asbestos gasket for all types of industrial pipe flanges. This sheet also complies with the Waterworks Law(Ministry of Helth and Welfare of Japan)

Compatible Fluids	Air, Water, (water) steam, petroleum-derived oils, oil-gas, neutral aqueous salt solutions, weak acids, weak alkalis, genaral gases ,etc.
Application	Suitable as a gasket for all types of industrial pipe flanges, including oil refineries, chemical plants and shipping, valve bonnets, and machinery contact surfaces.

VALQUA PRODUCT No.

Thickness mm

size mm (WxL)

6500

0.4 0.5 0.8 1.0 1.2 1.5 1.6 2.0 3.0 3.2

1270×1270
1270×3810
3048×3810

VALQUA PRODUCT No.	Temperature °C⁽¹⁾	Pressure MPa (kgf/cms⁽²⁾
		Aqueous fluids	Oily Fluids	Gaseous Fluids
6500	-50~160	2.94{30}	2.45{25}	0.98{10}
(1)The maximum application temperature may vary according to product. (2) The maximum pressure data mayvary according to fluid class and temperature.

MODEL No. 6501 Non-AS Joint Sheet

Suitable as a gasket for equipment and pipe flanges thanks to its superior heat and oil resistance. At high temperatures, in particular, it has superior stress relieving properties.

Compatible Fluids	Petroleum-derived oils-gas, air, water, (water)steam, neutral aqueous salt solutions, weak acids, weak alkalis, general gases,. etc.
Application	Suitable as a gasket for all types of industral pipe flanges, including valve bonnets, all types of equipment contact surfaces, petrochemical industry, shipping, etc.

VALQUA PRODUCT No.	Thickness mm	size mm (WxL)
6501	0.4 0.5 0.8 1.0 1.2 1.5 1.6 2.0 3.0 3.2	1270×1270 1270×3810 3048×3810

VALQUA PRODUCT No.	Temperature °C⁽¹⁾	Pressure MPa (kgf/cms⁽²⁾
		Aqueous fluids	Oily Fluids	Gaseous Fluids
6501	-50~200	2.94{30}	2.45{25}	0.98{10}
(1)The maximum application temperature may vary according to product. (2) The maximum pressure data mayvary according to fluid class and temperature.

SHORT PITCH PRECISION ROLLER CHAINS(A SERIES) ANSI ROLLER CHAIN

ANSI Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Transverse pitch	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 min	d2 max	L max	Lc max	h2 max	T max	Pt	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
*25-2	6.350	3.30	3.18	2.31	14.5	15.0	6.00	0.80	6.40	7.0	8.6	0.28
*35-2	9.525	5.08	4.77	3.58	22.5	23.3	9.00	1.30	10.13	15.80	19.7	0.63
41-2	12.700	7.77	6.25	3.58	25.7	26.9	9.91	1.30	11.95	13.34	16.9	0.81
40-2	12.700	7.95	7.85	3.96	31.0	32.2	12.00	1.50	14.38	28.20	35.9	1.12
50-2	15.875	10.16	9.40	5.08	38.9	40.4	15.09	2.03	18.11	44.40	58.1	2.00
60-2	19.050	11.91	12.57	5.94	48.8	50.5	18.0	2.42	22.78	63.60	82.1	2.92
80-2	25.400	15.88	15.75	7.92	62.7	64.3	24.00	3.25	29.29	113.40	141.8	5.15
100-2	31.750	19.05	18.90	9.53	76.4	80.5	30.00	4.00	35.76	177.00	219.4	7.80
120-2	38.100	22.23	25.22	11.10	95.8	99.7	35.70	4.80	45.44	254.00	314.9	11.70
140-2	44.450	25.40	25.22	12.70	103.3	107.9	41.00	5.60	48.87	344.80	427.5	15.40
160-2	50.800	28.58	31.55	14.27	123.3	128.1	47.80	6.40	58.55	453.60	562.4	20.14
180-2	57.150	35.71	35.48	17.46	138.6	144.4	53.60	7.20	65.84	560.50	695.0	29.22
200-2	63.500	39.68	37.85	19.85	151.9	158.8	60.00	8.00	71.55	707.60	877.4	32.24
240-2	76.200	47.63	47.35	23.81	183.4	190.8	72.39	9.50	87.83	1020.60	1255.3	45.23
*Bushing chain : d1 in the table indicate the external diameter of the bushing.

RS^® Roller Chain

A roller chain series with significantly improved kW ratings capacity and enhanced performance relative to chain size and application.

SHORT PITCH PRECISION ROLLER CHAIN(B SERIES) BS ROLLER CHAIN, duplex roller chain

DIN ISO Chain No.	Pitch	Roller Diameter	Width between inner plates	Pin Diameter	Pin length		Inner Plate Depth	Plate Thickness	Transverse pitch	Ultimate tensile strength	Average tensile Strength	Weight per meter
	P	d1 max	b1 minW	d2 max	L max	Lc max	h2 max	t/T max	Pt	Q min	Q0	q
	mm	mm	mm	mm	mm	mm	mm	mm	mm	kN	kN	Kg/m
05B-2	8.000	5.00	3.00	2.31	13.9	14.5	7.10	0.80	5.64	7.8	10.2	0.33
*06B-2	9.525	6.35	5.72	3.28	23.4	24.4	8.20	1.30	10.24	16.9	18.7	0.77
08B-2	12.700	8.51	7.75	4.45	31.2	32.2	11.80	1.60	13.92	32.0	38.7	1.34
10B-2	15.875	10.16	9.65	5.08	36.1	37.5	14.70	1.70	16.59	44.5	56.2	1.84
12B-2	19.050	12.07	11.68	5.72	42.0	43.6	16.00	1.85	19.46	57.8	66.1	2.31
16B-2	25.400	15.88	17.02	8.28	68.0	69.3	21.00	4.15/3.1	31.88	106.0	133.0	5.42
20B-2	31.750	19.05	19.56	10.19	77.8	81.5	26.40	4.5/3.5	36.45	170.0	211.2	7.20
24B-2	38.100	25.04	25.40	14.63	101.7	106.2	33.20	6.0/4.8	48.36	280.0	319.2	13.40
28B-2	44.450	27.94	30.99	15.90	124.6	129.1	36.70	7.5/6.0	59.56	360.0	406.8	16.60
32B-2	50.800	29.21	30.99	17.81	124.6	129.6	42.00	7.0/6.0	58.55	450.0	508.5	21.00
40B-2	63.500	39.37	38.10	22.89	154.5	161.5	52.96	8.5/8.0	72.29	630.0	711.9	32.00
48B-2	76.200	48.26	45.72	29.24	190.4	198.2	63.80	12/10	91.21	1000.0	1130.0	50.00
*Straight side plates

BS / DIN Roller Chain

BS/DIN standard roller chain that conforms to ISO ‘B’(ISO606-1994(E))

All dimensions differ from that of ANSI and JIS standard roller chain except for the chain pitch.
Special sprockets are also available.

Large Pitch Conveyor Chains

Economical general purpose chain.
Pins and bushings hardened through a state-of-the-art heat treatment process.
Chain sizes available in metric and imperial.
Wide variety of attachments to choose from.

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS

DIN ISO Chain No	ANSI Chain No.	P	G	L	F	W	h4	d4
DIN ISO Chain No	ANSI Chain No.	mm	mm	mm	mm	mm	mm	mm
C208A C208AL	C2040 C2042	25.4	19.1	9.5	25.4	39.6	9.1	3.4
C208B C208BL		25.4	23.2	12.7	25.4	39.6	9.1	4.5
C210A C210AL	C2050 C2052	31.75	23.8	11.9	31.8	49.0	11.1	5.5
C212A 212AL	C2060 C2062	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C212AH 212AHL	C2060H C2062H	38.1	28.6	14.3	42.9	67.8	14.7	5.5
C216A C216AL	C2080 C2082	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C216AH C216AHL	C2080H C2082H	50.8	38.1	19.1	55.6	87.8	19.1	6.8
C220A C220AL	C2100 C2102	63.5	47.6	23.8	66.6	107.5	23.4	9.2
C220AH C220AHL	C2100H C2102H	63.5	47.6	23.8	66.6	107.5	23.4	9.2
C224A C224AL	C2120 C2122	76.2	57.2	28.6	79.3	121.4	27.8	11.0
C224AH C224AHL	C2120H C2122H	76.2	57.2	28.6	79.3	121.4	27.8	11.0
C232A C232AL	C2160 C2162	101.6	76.2	38.1	104.7	151.6	36.5	13.1
C232AH C232AHL	C2160H C2162H	101.6	76.2	38.1	104.7	151.6	36.5	13.1

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

Chain No.	P	G	C	F	T	d4
Chain No.	mm	mm	mm	mm	mm	mm
40	12.700	9.5	12.70	19.05	1.50	3.4
50	15.875	12.7	15.90	25.25	2.03	5.5
60	19.050	15.9	18.30	29.33	2.42	5.5
80	25.400	19.1	24.60	34.70	3.25	6.8
100	31.750	25.4	31.80	43.30	4.00	9.2
120	38.100	28.6	36.50	51.60	4.80	9.8
140	44.450	34.9	44.50	62.00	5.60	11.4
160	50.800	38.1	50.80	69.85	6.40	13.1
*06B	9.525	8.0	9.52	13.50	1.30	3.5
08B	12.700	9.5	13.35	18.90	1.60	4.3
10B	15.875	14.3	16.50	22.95	1.70	5.3
12B	19.050	16.0	21.45	28.60	1.85	6.4
16B	25.400	19.1	23.15	34.00	3.10	6.4

DOUBLE PITCH CONVEYOR CHAIN ATTACHMENTS, SA-1, SK-1

DIN ISO Chain No	ANSI Chain No.	P	G	L	C1	C2	F	d4	d5
DIN ISO Chain No	ANSI Chain No.
C208A C208AL	C2040 C2042	25.40	19.1	9.5	11.1	13.5	20.5	3.4	5.5
C208B C208BL		25.40	23.2	12.7	11.1	13.5	20.5	4.5	5.5
C210A C210AL	C2050 C2052	31.75	23.8	11.9	14.3	15.9	25.0	5.5	6.6
C212A 212AL	C2060 C2062	38.10	23.8	14.3	17.5	19.1	32.9	5.5	9.2
C212AH 212AHL	C2060H C2062H	38.10	28.6	14.3	17.5	19.1	32.9	5.5	9.2
C216A C216AL	C2080 C2082	50.80	28.6	19.1	22.2	25.4	43.5	6.6	11.0
C216AH C216AHL	C2080H C2082H	50.80	38.1	19.1	22.2	25.4	43.5	6.6	11.0
C220A C220AL	C2100 C2102	63.50	47.6	23.8	28.6	31.8	50.4	8.4	13.0
C220AH C220AHL	C2100H C2102H	63.50	47.6	23.8	28.6	31.8	50.4	8.4	13.0

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, A-1, K-1

Chain No.	P	G	F	W	T	h4	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm
40	12.700	9.5	25.40	35.2	1.50	7.90	3.4
50	15.875	12.7	31.75	46.2	2.03	10.30	5.5
60	19.050	15.9	38.10	55.6	2.42	11.90	5.5
80	25.400	19.1	50.80	64.8	3.25	15.90	6.8
100	31.750	25.4	63.50	87.3	4.00	19.80	9.2
120	38.100	28.6	76.20	108.5	4.80	23.00	9.8
140	44.450	34.9	88.90	123.0	5.60	28.60	11.4
160	50.800	38.1	101.60	142.8	6.40	31.80	13.1
*06B	9.525	8.0	19.04	27.0	1.30	6.50	3.5
08B	12.700	9.5	25.40	36.4	1.60	8.90	4.3
10B	15.875	14.3	31.75	44.6	1.70	10.31	5.3
12B	19.050	16.0	38.10	52.4	1.85	13.46	6.4
16B	25.400	19.1	50.80	72.6	3.10	15.88	6.4
* Straight side plates

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WA-1, WA-2, WK-1, WK-2

Chain No.	P	G	L	F	W	T	h4	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm	mm
40	12.700	23.00	12.700	25.4	35.6	1.50	7.90	3.4
50	15.875	28.80	15.875	31.8	46.8	2.03	10.30	5.5
60	19.050	34.65	19.050	38.1	56.4	2.42	11.90	5.5
80	25.400	45.90	25.400	50.8	73.2	3.25	15.90	6.8
100	31.750	57.65	31.750	63.5	89.8	4.00	19.80	9.2
08B	12.700	24.00	12.700	25.4	36.4	1.60	8.90	4.3
10B	15.857	29.58	15.875	31.8	44.6	1.70	10.31	5.3
12B	19.050	34.05	19.050	38.1	52.4	1.85	13.46	6.4
16B	25.400	46.04	25.400	50.8	72.6	3.10	15.88	6.4

SHORT PITCH CONVEYOR CHAIN ATTACHMENTS, WSA-1, WSA-2, WSK-1, WSK-2

Chain No.	P	G	L	C	F	T	d4
Chain No.	mm	mm	mm	mm	mm	mm	mm
40	12.700	23.00	12.700	12.70	17.40	1.50	3.4
50	15.875	28.80	15.875	15.90	23.05	2.03	5.5
60	19.050	34.65	19.050	18.30	26.86	2.42	5.5
80	25.400	45.90	25.400	24.60	35.45	3.25	6.8
100	31.750	57.65	31.750	31.80	44.00	4.00	9.2
08B	12.700	23.30	12.700	13.35	18.90	1.60	4.3
10B	15.857	29.58	15.875	16.50	22.95	1.70	5.3
12B	19.050	34.05	19.050	21.45	28.60	1.85	6.4
16B	25.400	46.04	25.400	23.15	34.00	3.10	6.4

Lambda Chain

The best product for long-life without lubrication.Further upgraded through improved bushings.Twice the wear life compared to conventional specifications.
(More than 14 times the wear life of standard RS® Roller chain for sizes up to RS100)

Can be used within a temperature range of -10°C to +150°C (+14°F to +302°F)

sumo chain diado C2100HF2

No.	Name of Part	Material	Weight
1	Attachment Plate	45Mn	251.9g
2	Pin Link Plate	45Mn	91.569g
3	Pin	200CrMnMo	23.6g
4	Roller Link Plate	45Mn	86.128g
5	Bushing	10(20)	15.77g
6	Roller	10	19.02g
7	CL pin Link Plate	45Mn	91.332g
8	CL Pin	20CrMnMo	25.07g
9	Cotter Pin

MODEL No. 105 GATE VALVE

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Shutter and Guide Pin:	CW617N Forged Brass
Threads:	ISO228/1
Shutter Seal :	NBR 70 SH
Seal Pressing Washer	2PTFEAISI 302 Stainless Steel
Spring:	AISI 302 Stainless Steel
Working Temperatures:	air -20°C + 120°C water -0°C + 90°C
Max Pressure :	PN 16 Bar

Small Pitch Conveyor Chains

Most popular general purpose chain within the attachment chain series. All parts are made of steel and have been hardened through a state-of-the-art heat treatment process.
Wide variety of attachments to choose from.
Please specify attachment type and spacing.

HOLLOW PIN CHAIN

Unit : mm

Chain No.	Averarage Tensile Strenght	Pitch	Roller Diameter	Inner Width	Pin Diameter	inner Plate Thickness	Outer Plate Thickness	Plate Height
Chain No.	lbf	P	R	W	D	T1	T2	H
SM200040	20000	101.6	47.6	19.0	13.2	5.0	5.0	38.1
SM360060	36000	152.4	66.7	25.4	20.1	8.0	8.0	50.8
SM500060	50000	152.4	66.7	25.4	20.1	9.0	8.0	50.8

SOLID EXTEND PIN

Unit : mm

Chain No.	Averarage Tensile Strenght	Pitch	Roller Diameter	Inner Width	Pin Diameter	inner Plate Thickness	Outer Plate Thickness	Plate Height
Chain No.	lbf	P	R	W	D	T1	T2	H
SM400060EP4	40000	152.4	66.7	25.4	27.0	8.0	8.0	50.8
SM600060EP6	60000	152.4	66.7	25.4	27.0	9.0	8.0	50.8

HAND GLOVE CHAIN

Unit : mm

Chain No.	Pitch	Roller Diameter	Inner Width	Pin Diameter	Inner PlateThickness	Outer PlateThickness	Plate Height	Total Lenght
Chain No.	P	R	W	D	T1	T2	H	L1	L2
P90F1	90.0	60.0	29.5	14.2	8.0	7.0	38.5	211	236.6

RICE MILL CONVEYOR CHAIN, C2080HF6

RICE MILL CONVEYOR CHAIN, โซ่โรงสีข้าว, sumo

No.	Name of Part	Material	Weight
1	Pin Link Plate	45Mn	48.5g
2	Pin	20CrMnMo	14.0g
3	Roller Link Plate	45Mn	45.0g
4	Bushing	10	8.68g
5	Roller	10	12.0g
6	CL Pin Link Plate	45Mn	48.5g
7	Connecting Pin	20CrMnMo	14.9g
8	Cotter Pin
9	Attachment Plate	45Mn	103g

SUPER Roller Chain

Compared to RS Roller Chain, kilowatt ratings, allowable load, and tensile strength are all greater, enabling the use of a chain 1 to 2 sizes smaller.

ANSI 35 Standard Sprocket

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	24.88	28	8	10	19	19	0.02	* * * * * * S35C (B TYPE)
9	27.84	31	8	11	22	20	0.06
10	30.84	35	8	12	25	20	0.08
11	33.81	38	8	14	27	20	0.09
12	36.80	41	9	16	31	20	0.12
13	39.80	44	9	18	32	20	0.12
14	42.81	47	9	16	30	20	0.12
15	45.81	51	9	22	35	20	0.16
16	48.82	54	9	23	37	20	0.19
17	51.84	57	11	25	41	20	0.22
18	54.85	60	11	28	44	20	0.25
19	57.87	63	11	29	47	20	0.28
20	60.89	66	11	32	50	20	0.32
21	63.91	69	11	32	53	20	0.36
22	66.93	72	11	32	53	20	0.37
23	69.95	75	11	32	53	20	0.38
24	72.97	78	11	32	53	22	0.43
25	76.00	81	11	32	53	22	0.44
26	79.02	84	11	32	53	22	0.45
27	82.05	87	11	32	53	22	0.46
28	85.07	90	11	32	53	22	0.48
29	88.10	93	11	32	53	22	0.49
30	91.12	96	11	32	53	22	0.51
31	94.15	99	11	32	53	22	0.52
32	97.18	102	11	32	53	22	0.54
33	100.20	105	11	32	53	22	0.56
34	103.23	109	11	32	53	22	0.57
35	106.26	112	11	32	53	22	0.59
36	109.29	115	11	32	53	22	0.61
37	112.31	118	11	32	63	22	0.77
38	115.34	121	11	32	63	25	0.82
39	118.37	124	11	32	63	25	0.83
40	121.40	127	11	32	63	25	0.85
41	124.43	129	11	42	63	25	0.85	SS41(BW TYPE)
42	127.46	133	15	40	63	25	0.92
43	130.48	135	15	40	63	25	0.92
44	133.53	138	15	40	63	25	0.92
45	136.55	142	15	40	63	25	0.95
46
48	145.64	151	15	40	63	25	1.00
50	151.69	157	15	40	63	25	1.05
52
54	163.80	169	15	40	63	25	1.20
60	181.99	187	15	40	63	25	1.30

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :8T=13.92mm,9T=17.02mm, 10T=20.07mm, 11T=23.11mm, 12T=25.91mm, 13T=28.96mm
2. B-type solid sprockets over 40 teeth made by S35C are available.

ANSI 40 STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	33.20	38	9	12.7	24.6	22.2	0.10	* * * * * S35C (B TYPE)
9	37.13	42	9	14	28	22	0.11
10	41.10	46	9	18	32	22	0.14
11	45.08	51	10	23	37	22	0.19
12	49.07	55	10	25	40	22	0.22
13	53.07	59	13	23	37	22	0.23
14	57.07	63	13	26	42	22	0.28
15	61.08	67	13	28	46	22	0.34
16	65.10	71	13	30	50	22	0.40
17	69.12	76	13	32	54	22	0.46
18	73.14	80	13	32	57	22	0.51
19	77.16	84	13	38	62	22	0.59
20	81.18	88	14	42	67	25	0.76
21	85.21	92	14	45	71	25	0.85
22	89.24	96	14	48	75	25	0.95
23	93.27	100	14	48	77	25	1.00
24	97.30	104	14	40	63	25	0.84
25	101.33	108	14	40	63	25	0.88
26	105.36	112	14	40	63	25	0.92
27	109.40	116	14	40	63	25	0.96
28	113.43	120	14	40	63	25	1.00
29	117.46	124	14	40	63	25	1.05
30	121.50	128	14	40	63	25	1.10
31	125.53	133	14	45	63	28	1.20
32	129.57	137	14	45	68	28	1.30
33	133.61	141	14	45	68	28	1.30
34	137.64	145	14	45	68	28	1.30
35	141.68	149	14	45	68	28	1.40
36	145.72	153	17	45	68	28	1.40	SS41(BW TYPE
38	153.79	161	17	45	68	28	1.50
40	161.87	169	17	45	68	28	1.60
41	165.91	173	17	48	73	32	1.80
42	169.95	177	17	48	73	32	2.00
43	173.98	181	17	48	73	32
44	178.02	185	17	48	73	32
45	182.06	189	17	48	73	32	2.10
48	194.18	201	17	48	73	32	2.30
50	202.26	209	17	48	73	32	2.40
54	218.42	226	17	48	73	32	2.80
60	242.66	250	17	48	73	32	3.20

ANSI 50 STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Dp	B type/BWType
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	41.48	47	9	15.9	28.6	25.4	0.19	* * * * * * S35C (B TYPE)
9	46.41	53	10	19	34	25	0.20
10	51.38	58	10	22	40	25	0.27
11	56.35	64	13	24	46	25	0.33
12	61.34	69	13	30	51	25	0.41
13	66.34	74	13	30	51	25	0.46
14	71.34	79	13	32	52	25	0.52
15	76.35	84	13	36	57	25	0.62
16	81.37	89	13	40	62	25	0.72
17	86.39	94	13	42	67	25	0.83
18	91.42	100	13	48	72	28	1.00
19	96.45	105	13	48	73	28	1.10
20	101.48	110	14	48	73	28	1.20
21	106.51	115	14	48	73	28	1.20
22	111.55	120	16	48	73	28	1.30
23	116.58	125	16	48	73	28	1.30
24	121.62	130	16	48	73	28	1.45
25	126.66	135	16	48	73	28	1.50
26	131.70	140	16	48	73	28	1.50
27	136.74	145	16	48	73	28	1.50
28	141.79	150	16	48	73	28	1.60
29	146.83	155	16	48	73	28	1.70
30	151.87	161	16	48	73	28	1.80
31	156.92	166	16	48	73	28	1.80
32	161.96	171	16	48	73	28	1.90
33	167.01	176	16	48	73	28	2.00
34	172.05	181	16	48	73	28	2.10
35	177.10	186	16	48	73	28	2.20
36	182.14	191	19	52	83	35	2.70	SS41(BW TYPE)
37	187.19	196	19	52	83	35	2.80
38	192.24	201	19	52	83	35	2.90
39	197.29	206	19	52	83	35	3.00
40	202.33	211	19	52	83	35	3.10
41	207.38	216	19	52	83	35	3.20
42	212.43	221	19	52	83	35	3.30
43	217.48	226	19	52	83	35	3.40
44	222.53	231	19	52	83	35	3.50
45	227.58	237	19	52	83	35	3.60
46	232.63	242	19	52	83	35	4.00
48	242.73	252	19	52	83	35	4.00
50	252.83	262	19	52	83	35	4.20
54	273.02	282	19	52	83	35	4.80
60	303.33	312	19	52	83	35	5.60

Note:
1.Sproket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameters(dg) are :8T=23.00mm,9T=28.96mm, 10T=34.04, 11T=39.12mm, 12=49.02mm.
2. B-type solid sprockets over 35 teeth made by S35C are available.

BS08B STANDARD SPROCKET

sumo, เฟืองโซ่, เฟืองคอนเวเยอร์, เฟือง, STANDARD SPROCKET

Dimension : mm

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	33.20	37.2	9	12.7	24.6	22.2	0.10	* * * * S35C (B TYPE)
9	37.13	41.0	9	14	28	22	0.11
10	41.10	45.2	9	18	32	22	0.14
11	45.08	48.7	10	23	37	22	0.19
12	49.07	53.0	10	25	40	22	0.22
13	53.07	57.4	13	23	37	22	0.23
14	57.07	61.8	13	26	42	22	0.28
15	61.08	65.5	13	28	46	22	0.34
16	65.10	69.5	13	30	50	22	0.40
17	69.12	73.6	13	32	54	22	0.46
18	73.14	77.8	13	32	57	22	0.51
19	77.16	81.7	13	38	62	22	0.59
20	81.18	85.8	14	42	67	25	0.76
21	85.21	89.7	14	45	71	25	0.85
22	89.24	93.8	11	48	75	25	0.95
23	93.27	98.2	14	48	77	25	1.00
24	97.30	101.8	14	40	63	25	0.84
25	101.33	105.8	14	40	63	25	0.88
26	105.36	110.0	14	40	63	25	0.92
27	109.40	114.0	14	40	63	25	0.96
28	113.43	118.0	14	40	63	25	1.00	S35C (B TYPE)
29	117.46	122.0	14	40	63	25	1.05
30	121.50	126.1	14	40	63	25	1.10
31	125.53	130.2	14	40	63	25	1.20
32	129.57	134.3	14	45	68	28	1.30
33	133.61	138.4	14	45	68	28	1.30
34	137.64	142.6	14	45	68	28	1.30
35	141.68	146.7	14	45	68	28	1.40
36	145.72	151.0	17	45	68	28	1.40	SS41(BW TYPE)
38	153.79	158.6	17	45	68	28	1.50
40	161.87	166.8	17	45	68	28	1.60
41	165.91	171.4	17	48	73	32	1.80
42	169.95	175.4	17	48	73	32	1.90
43	173.98	179.4	17	48	73	32	2.00
44	178.02	183.8	17	48	73	32	2.10
45	182.06	188.0	17	48	73	32	2.20
48	194.18	200.3	17	48	73	32	2.40
50	202.26	208.3	17	48	73	32	2.54
54	218.42	224.1	17	48	73	32	2.84
60	242.66	248.6	17	48	73	32	3.30

Note:
1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =18.00mm, 9T=21.00mm,10T=25.00, 11T =30.00mm, 12T=32.00mm
2. B-type solid sprockets over 35 teeth made by S35C are availiable

BS10B STANDARD SPROCKET

No.of Teeth	Pitch Dia Dp	Outside Dia Do	31Btype/BWType32
			Bore : d		Hub		Approx. WT(kg)	Material
			Min	Max	Dh	L	Approx. WT(kg)	Material
8	41.48	47.0	9	15.9	28.6	25.4	0.19	* * * * * * S35C (B Type)
9	46.41	52.6	10	19	34	25	0.20
10	51.38	57.5	10	22	40	25	0.27
11	56.35	63.0	13	24	46	25	0.33
12	61.34	68.0	13	30	51	25	0.41
13	66.34	73.0	13	30	51	25	0.46
14	71.34	78.0	13	32	52	25	0.52
15	76.35	83.0	13	36	57	25	0.62
16	81.37	88.0	13	40	62	25	0.72
17	86.39	93.0	13	42	67	25	0.83
18	91.42	98.3	13	48	72	28	1.00
19	96.45	103.3	13	48	73	28	1.10
20	101.48	108.4	14	48	73	28	1.20
21	106.51	113.4	14	48	73	28	1.20
22	111.55	118.0	16	48	73	28	1.30
23	116.58	123.4	16	48	73	28	1.30
24	121.62	128.3	16	48	73	28	1.45
25	126.66	134.0	16	48	73	28	1.50
26	131.70	139.0	16	48	73	28	1.50
27	136.74	144.0	16	48	73	28	1.50
28	141.79	148.7	16	48	73	28	1.60
29	146.83	153.8	16	48	73	28	1.70
30	151.87	158.8	16	48	73	28	1.80	S35C (B TYPE)
31	156.92	163.9	16	48	73	28	1.80
32	161.96	168.9	16	48	73	28	1.90
33	167.01	174.5	16	48	73	28	2.00
34	172.05	179.0	16	48	73	28	2.10
35	177.10	184.1	16	48	73	28	2.20
36	182.14	198.1	19	52	83	35	2.70	SS41 (BW TYPE)
37	187.19	194.2	19	52	83	35	2.80
38	192.24	199.2	19	52	83	35	2.90
39	197.29	204.2	19	52	83	35	3.00
40	202.33	209.3	19	52	82	35	3.10
41	207.38	214.8	19	52	83	35	3.20
42	212.43	219.9	19	52	83	35	3.30
43	217.48	224.9	19	52	83	35	3.40
44	222.53	230.0	19	52	83	35	3.50
45	227.58	235.0	19	52	83	35	3.60
46	232.63	240.1	19	52	83	35	4.00
48	242.73	250.2	19	52	83	35	4.00
50	252.83	260.3	19	52	83	35	4.20
54	273.02	280.5	19	52	83	35	4.80
60	303.33	310.8	19	52	83	35	5.60

Note:
1.Sprocket marked with an asterisk (*) has a groove at the external circumference of hub. Groove diameter(Dg) are:8T =22.00mm, 9T=27.00mm,10T=32.04, 11T =37.00mm, 12T=42.00mm, 13T=47.00mm
2. B-type solid sprockets over 35 teeth made by S35C are availiable

Flexible Coupling : Jaw-Flex Coupling

No lubrication, non-backlash and high torsional stiffness coupling makes full use of the characteristics of servomotor.

Rating		Bore Range
N-m	{kgf-m}	mm
0.4 – 711	{0.04 – 72.6}	φ5 – 69

Flexible Coupling : Neo Flex Coupling

No lubrication long-life flexible coupling ideal for medium and high speeds,and in situations subject to heavy vibration or impact.

Rating		Bore Range
N-m	{kgf-m}	mm
43.1 – 980	{4.4 – 100}	φ13 – 90

Flexible Coupling : Roller Chain Coupling

Can be used with all kinds of ordinary power transmission. It is a strong, flexible coupling.

This is a strong Flexible Coupling for general use.

Rating		Bore Range
N-m	{kgf-m}	mm
100 – 717.4	{10.2 – 73200}	φ9.5 – 700

Cam Clutch

Non-backlash one-way clutches with a multicam mechanism

Carefully machined on specialized equipment for very high precision
Durable cam due to unique heat-treatment
High reliability due to stable clutching performance

Rating		Bore Range
Standard models
N-m	{kgf-m}	mm
2.45 – 686000	{0.25 – 70000}	φ9.511 – 450

Mechanical Overload Protectors : Torque Limiter

General purpose friction type overload protectors

Inexpensive
Simple to use
Simple mechanism
Non-asbestos type

Rating		Bore Range
Standard models
N-m	{kgf-m}	mm
1.0 – 9310	{0.1 – 950}	φ8 – 130

Ready-made bore types are also available.

Keyless (Friction type) Locking Device : POWER-LOCK

Key less shaft & hub Locking Device.

MODEL NO. AN111R Ball Valve

MODEL NO. : AN111R 1 piece Ball Valve (Reduce Bore)

1 pc. SS 316 Ball Valve, Reduce Bore
Investment Casting Body
Blow-out Proof Stem Design
Working Pressure : 1,000 WOG
Screwed End
Size : 1/4″ – 3″
15% REIN G.F.PTEE

MODEL No. 220 BALL VALVE (Full Bore)

MODEL:220 BALL VALVE (Full Bore), บอลวาล์ว

Technical Specification
Body:	Brass CW617N Forged, SandBlast and Nickel-Plated
Ball:	CW617N Forged and Hard Chromed
Threads:	ISO7/1(NPT or BSPT upon request)
Levers:	UNI-EN 1706 Aluminium Epoxy Enamelled UNI-EN 10025 Steel, PVC-Coated
Ball Seals	2PTFE
Spindle	Brass CW614N (Anti Blow out Proof)
Spindle Seals	<1PTFE + 1 O-Ring NBR
Temperature Range :	-20°C + 120°C
Working Pressure	From PN 64 to PN 20 Bar WOG 600 – WSP 150

Material	Bronze, Cast Iron, Stainless Steel, Alluminium
Spec	125/150
Size	1/4″-12″

Type	Gate, Globe, Check, Ball, Y-Strainer, Butterfly valves, Control valves.
Material	Bronze and Brass, Cast iron, Ductile iron, Cast steel, Stainless steel, Low Alloy steel, Aluminum, Super Duplex Stainless steel.
Specifications & Class	150, 300, 600, 800, 900, 1500, 2000, 2500, 4500, 6000, 5K, 10K, 20K, 30K, 40K
Size Standard	1/4 inch to 36 inches

The Fast & Economical way of joining Plain Ended Piping

ASSEMBLY TOLERANCES

Axial Restraint NORMACONNECT® GRIP TYPE Pipe Coupling

Axial Restraint NORMACONNECT^® GRIP TYPE Pipe Coupling